AEG 70630 manual Opening and Closing the Filling Door, Add the washing

Page 21

Operating Instructions

Opening and Closing the Filling Door

0 Open: Pull on the handle of the filling door.

0Close: Press the filling door firmly closed.

The indicators DOOR and START/PAUSE show whether the door can be opened while the appliance is switched on:

Indicator DOOR

Indicator START/PAUSE

Opening door possible?

Glows green

Flashes red

Yes

Glows red

Glows red

No1)

 

 

 

1) The filling door is locked because of a high water level or a high temperature.

3

If

 

– the error code Cd is shown in the multi-display and

– the indicators PRE WASH, RINSE and RINSE+ flash

you tried to start a washing program without first closing the filling door properly. In this case push the door shut firmly and restart the washing program.

Add the washing

3

For the maximum filling quantities, see the "Program tables".

 

See "Sort and prepare washing" for information on correctly preparing

the washing.

0 1. Sort and prepare the washing according to type.

2.Open the filling door: Pull on the handle of the filling door.

3.Fill with washing.

Important! When closing the door, make sure no items of washing get stuck! This could damage textiles and the unit.

4.Close the filling door securely.

21

Image 21
Contents ÖKO-LAVAMAT 70630 update Dear Customer Contents Installation and connection instructions Warranty conditions / Customer service centres Safety Before Using for the First TimeCorrect Use General Safety Child SafetyEnvironmental tips DisposalDisposing of the Packaging Material Disposing of your old applianceUnit description Front viewDrawer for detergent and care agent Program Selector Control panelWOOL/P Handwash Additional program buttons Water Energy Time Temperature Running time displayProgram Selector Before the First Wash What does Update mean?Sort washing and prepare Prepare washing cycleWashing Types and Care Codes How much washing detergent and care agent? Water softenerWater hardness details Run a Washing Cycle Brief InstructionsAfter the Washing Program Ends Tables Setting the Washing ProgramDelay timer Set the delay timer/soaking durationChange Spin Speed / Select Rinse Hold Soaking durationOpening and Closing the Filling Door Indicator Door Indicator START/PAUSEAdd the washing For the maximum filling quantities, see the Program tablesIf using liquid detergent / tablets Add Washing Detergent/Care AgentSection Washing Detergents and Care Agents If the delay timer has been set Starting the washing programIs pressed Program sequence display Completion of the Washing ProgramMulti-display Change the Spin SpeedIf the display Over Dosing lights up, too much Washing cycle is finished/Remove the washingProgram Tables Care Codes TemperatureWashing Type of Washing MaxSeparate Rinse Separate Conditioning/Starching/ImpregnatingSeparate Spin Type of WashingDetergent Drawer Cleaning and CareMain door Washing DrumCleaning the drain pump Before cleaning the drain pumpGency emptying Remedying faults Problem Possible Cause RemedyWhat to do if Water tap closed Open the water tap Water is not running Replace it if necessary Tor lights up green If there are still grey spots on the washing If the washing results are not satisfactoryIf at the end of the last rinse foam is still visible If there are white remnants on the washingCarrying out emergency drainage When the water is completely drained Cancel additional rinse Additional rinsing cycle RINSE+Set additional rinse Cancelling the child safety feature Child Safety FeatureCan be started On the inside of the filling doorInstallation Safety Precautions Installation and connection instructionsTransporting the appliance Installation of the applianceRemove transportation protection Under unitsInside of the unit against splash water Close the hole with the cap GPrepare the installation place Installation on a concrete baseInstallation on vibrating floors Pensated for by adjusting the adjustable feet Compensate for floor unevennessDed foot as far as it will go Electrical connection Water connectionPermissible water pressure Water inflow Tie the bend to the tap or the wall using a piece of string Water drainWater drain-off inside a basin Dimensions Technical dataDimensions in mm Delivery heads over 1mAutres agences étrangères assurant le service après-vente Further after-sales service agencies overseasWeitere Kundendienststellen im Ausland Otros puntos de Postventa en el extranjeroBulgaria Kuwait/Arabian Gulf Croatia New ZealandCyprus Lebanon Oman Estonia Latavia PolandJapan Singapore Slovenia Israel Malaysia Saudi ArabiaThailand Slovakia Rep South Africa HungaryPage Page Index When do you incur costs even during the warranty period? ServiceAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG