AEG 70630 manual Running time display, Program Selector, Water Energy Time Temperature

Page 13

Operating Instructions

Consumption Values and Time Requirements

The values for selected programs in the following tables were deter- mined under normal conditions. However, there is a helpful orientation aid for domestic operation.

Program Selector/	Filling Quantity	Water	Energy	Time
Temperature	in kg	in Litres	in kWh	in Minutes
COTTONS/LINEN 95	5	45	1.70	137
COTTONS/ LINEN 601)	5	42	0.94	125
COTTONS/LINEN 40	5	49	0.60	122
EASY-CARES 40	2.5	54	0.50	102
DELICATES 30	2.5	50	0.30	68

WOOL/ P (Handwash) 30	2	48	0.20	37

1)Note: Program setting for a test in accordance with EN 60 456. The consumption values can deviate from the stated values depending on the water pressure, hardness, inlet temperature, room temperature, type and quantity of washing, the washing powder/liquid used, fluctuations in the mains voltage and selected additional functions.

Running time display

3	The durations of the washing programs depend
	on the washing habits and ambient conditions

at the installation location. E. g. the washing type, washing quantity, type of detergent, wa- ter temperature and room temperature etc.

can influence the duration of the washing program.

The washing machine saves from each program the running times of the last wash cycles and calculates from them the average running time for a washing cycle. This average running time is shown by the Multi- display during the next wash.

After several washes, the running time shown in the multi display is thereby adapted to the usual washing practice and the ambient condi- tions at the installation location.

13

Image 13

Contents ÖKO-LAVAMAT 70630 update Dear Customer Contents Installation and connection instructions Warranty conditions / Customer service centres Before Using for the First Time SafetyCorrect Use General Safety Child SafetyEnvironmental tips DisposalDisposing of the Packaging Material Disposing of your old applianceFront view Unit descriptionDrawer for detergent and care agent Program Selector Control panelWOOL/P Handwash Additional program buttons Running time display Water Energy Time TemperatureProgram Selector Before the First Wash What does Update mean?Sort washing and prepare Prepare washing cycleWashing Types and Care Codes Water softener How much washing detergent and care agent?Water hardness details Brief Instructions Run a Washing CycleAfter the Washing Program Ends Tables Setting the Washing ProgramDelay timer Set the delay timer/soaking durationChange Spin Speed / Select Rinse Hold Soaking durationOpening and Closing the Filling Door Indicator Door Indicator START/PAUSEAdd the washing For the maximum filling quantities, see the Program tablesAdd Washing Detergent/Care Agent If using liquid detergent / tabletsSection Washing Detergents and Care Agents Starting the washing program If the delay timer has been setIs pressed Program sequence display Completion of the Washing ProgramMulti-display Change the Spin SpeedIf the display Over Dosing lights up, too much Washing cycle is finished/Remove the washingProgram Tables Care Codes TemperatureWashing Type of Washing MaxSeparate Rinse Separate Conditioning/Starching/ImpregnatingSeparate Spin Type of WashingDetergent Drawer Cleaning and CareMain door Washing DrumBefore cleaning the drain pump Cleaning the drain pumpGency emptying Problem Possible Cause Remedy Remedying faultsWhat to do if Water tap closed Open the water tap Water is not running Replace it if necessary Tor lights up green If there are still grey spots on the washing If the washing results are not satisfactoryIf at the end of the last rinse foam is still visible If there are white remnants on the washingCarrying out emergency drainage When the water is completely drained Additional rinsing cycle RINSE+ Cancel additional rinseSet additional rinse Cancelling the child safety feature Child Safety FeatureCan be started On the inside of the filling doorInstallation Safety Precautions Installation and connection instructionsTransporting the appliance Installation of the applianceRemove transportation protection Under unitsInside of the unit against splash water Close the hole with the cap GInstallation on a concrete base Prepare the installation placeInstallation on vibrating floors Compensate for floor unevenness Pensated for by adjusting the adjustable feetDed foot as far as it will go Water connection Electrical connectionPermissible water pressure Water inflow Water drain Tie the bend to the tap or the wall using a piece of stringWater drain-off inside a basin Dimensions Technical dataDimensions in mm Delivery heads over 1mAutres agences étrangères assurant le service après-vente Further after-sales service agencies overseasWeitere Kundendienststellen im Ausland Otros puntos de Postventa en el extranjeroBulgaria Kuwait/Arabian Gulf Croatia New ZealandCyprus Lebanon Oman Estonia Latavia PolandJapan Singapore Slovenia Israel Malaysia Saudi ArabiaThailand Slovakia Rep South Africa HungaryPage Page Index When do you incur costs even during the warranty period? ServiceAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG