Sharp HT-CN300W Connecting to the AC socket, „ Setting the AC voltage selector, Before connecting

Page 13

Connecting to the AC socket

HT-CN300W

„Setting the AC voltage selector

Check the setting of the AC voltage selector located on the rear panel before plugging the unit into a wall socket. If necessary, adjust the selector to correspond to the AC power voltage used in your area.

Turn the selector with a screwdriver until the appropriate voltage number appears in the window (110 V, 127 V, 220 V or 230 V - 240 V AC).

„Plugging in the remote control

Before connecting:

Check the setting of the AC voltage selector located on the AC adaptor. If necessary, adjust the selector to correspond to the AC power voltage used in your area.

Turn the selector to the appropriate voltage number using a screwdriver (110 V - 127 V or 220 V - 240 V).

„ Plugging in the main unit

After making all connections, plug the unit. If you plug the unit first, the unit will enter the demonstration mode (see page 13).

110V 127V 220V 240V

Wall socket

(230 - 240 V, 50/60 Hz)

To 3.6 V DC input socket

Wall socket

(230 - 240 V, 50/60 Hz)

Connecting to the AC socket -

Connections

Note:

Unplug the AC power lead from the wall socket if the unit will not be in use for a prolonged period of time.

Notes:

zYou can operate the remote control with batteries in areas where the AC adaptor lead cannot reach (see page 16).

zRemove the AC adaptor from the AC socket if the unit will not be in use for a prolonged period of time.

zUse only the supplied AC adaptor. Another adaptor may cause an electric shock or fire.

zIf the AC adaptor or its power supply lead is damaged, replace the AC adaptor with the same type (RADPA6006BGZZ) in order to avoid any hazards.

-

12

02/7/11 HT-CN300W_A_3.fm

Image 13

Contents HT-CN300W Special notes ContentsAccessories Accessories„ Volume control Precautions„ General Do not remove the outer cover, as this may resultIndicators Controls and indicatorsControls Reference „ Main unit with subwooferFull-Range Speaker Angle Adjusting Lever Label indication „ Remote control sensor„ Front/Centre/Surround speakers Speaker connections Speaker connectionsAerial Aerial connectionConnecting other equipment Connecting other equipment„ Connecting the DVD player „ Connecting the TV„ Selecting the colour TV system „ Connecting the camcorder, satellite receiver, etc. VideoTo select the colour TV system „ Setting the AC voltage selector Connecting to the AC socket„ Plugging in the remote control Before connecting„ To turn the power on „ Setting the FM/AM span selectorConnections Connecting to the AC socket Speaker system Placing the speaker systemPlacing Wall Installing the speakers on the wallPerform steps 1 4 to mount other speakers Changing the speaker angle„ Battery installation „ Test of the remote control Preparing the remote control„ How to open the remote control cover Precautions for battery useRemote control HT-CN300WOperation buttons on the remote control„ Operation buttons for the main unit Operation buttons on„ Operation buttons for other equipment „ Switching the operation buttons for the main unit„ Memory 1/2 buttons for other equipment Initial setting for Memory 1 buttonsMemory 1 buttons Memory 2 buttonsRemote Control Memorising the remote control buttons Memorising the remote control buttonsUsing the supplied labels „ Initialising the remote control buttonsMove the LEARN/TRANSMIT selector switch to Transmit Basic Operation Setting the clock Setting the clockTo readjust the clock To confirm the time displaySound control Display controlSound sound mode Enjoy Surround Sound sound modeEnjoy Surround Dynamic sound Acoustic effect StandardVirtual Stereo„ To enjoy with dynamic sound „ Sound modeHT-CN300WListening to the radio Auto tuningBasic Operation Listening to the radio To receive an FM stereo transmission„ To erase all the contents of the preset Memory „ To scan the preset stationsListening to a memorised station „ Memorising a station„ Speaker size setting Speaker settingsSpeaker settings Speaker type Speaker sizeSpeaker type Adjustable range „ Speaker delay setting„ Test tone „ Speaker level settingFL CT FR SW SL SR „ Setting the timer Timer and sleep operationAdvanced Features Timer and sleep operation Adjust the volume using the Volume or button„ Setting the sleep timer Troubleshooting chart Troubleshooting chart„ Operation „ SoundMaintenance Error indicators and warnings„ Cleaning the cabinet „ TV imageSpecifications Specifications„ Amplifier „ SubwooferMemo Memo Sharp Corporation