Sharp HT-CN300W „ Memory 1/2 buttons for other equipment, Initial setting for Memory 1 buttons

HT-CN300WOperation buttons on the remote control (continued)

Control	the remote control -
Remote	Operation buttons on
	-

19

„ Memory 1/2 buttons for other equipment Initial setting for Memory 1 buttons:

Memory 1 buttons:				1	TV/VCR
					Switches the input to TV or VCR.
The remote control is set at the factory to operate the Sharp's DVD, TV and VCR.				2	VCR CH
To operate Sharp products or other companies' equipment that cannot be controlled					Switches up the VCR channels.
by the default remote control, you can memorise their remote control operations				3	TV VOL
(learn function) (see page 20).				4	Turns up the TV volume.
					TV CH
Set the MEMORY 1/2 selector switch to MEMORY 1 to use the Memory 1 buttons.					Switches up the TV channels.
				5	TV VOL
Memory 2 buttons:					Turns down the TV volume.
				6	TV CH
No functions are stored at the factory setting. Memorise the remote control signals					Switches down the TV channels.
(learn function) of your equipment before use (see page 20).				7	VCR CH
					Switches down the VCR channels.
Set the MEMORY 1/2 selector switch to MEMORY 2 to use the Memory 2 buttons.				8	VCR
					Pauses VCR.
				9	VCR
					Rewinds the VCR rapidly.
				10	VCR
					Advances the VCR rapidly.
				11	VCR
					Stops the VCR.
				12	VCR
			OPEN		Plays the VCR.
				13	AUDIO
					Switches the DVD sound.
				14	SET UP
				15	Changes the DVD settings.
1			13		Selects the DVD menu.
2			14	16	DISPLAY
				17	Switches the DVD display.
3			15		Selects the DVD menu.
4			16	18	SUB
					Switches the subtitle of a DVD.
				19	ENTER
				20	Validates the menu.
5	7	17	19		Selects the DVD menu.
6	8	18	20	21	ANGLE
				22	Switches the angle of the DVD images.
					ZOOM
				23	Zooms the DVD images.
9	10 11 12	21 22 23 24			Selects the DVD menu.
				24
					TOP
					Displays the top menu of the DVD.
				For details, refer to the operation manual attached to the other equipment.

02/7/11 HT-CN300W_A_3.fm