Sharp HT-CN300W operation manual „ Setting the FM/AM span selector, „ To turn the power on

Page 14

HT-CN300W

Connecting to the AC socket (continued)

„ Setting the FM/AM span selector

„ Demonstration mode

Connections - Connecting to the AC socket -

13

The International Telecommunication Union (ITU) has established that member countries should maintain either a 10 kHz or 9 kHz interval between broadcasting frequencies of AM stations and 100 kHz or 50 kHz for FM stations. The illustration shows the 50/9 kHz zones (regions 1 and 3), and the 100/10 kHz zone (region 2).

Before using the unit, set the SPAN SELECTOR switch (on the rear panel) to the interval (span) of your area.

To change the tuning zone:

1Unplug the unit.

2Set the SPAN SELECTOR switch (on the rear panel) as follows. z For 50 kHz FM interval (9 kHz in AM) 50/9

z For 100 kHz FM interval (10 kHz in AM) 100/10

3Plug in the AC power lead.

Caution:

This operation will erase all data stored in memory and restore various settings to the initial status (default).

The first time the unit is plugged in, the unit will enter the demonstration mode. You will see words scroll.

To cancel the demonstration mode:

When the unit is in the power stand-by mode (demonstration mode), press the X- BASS button. The demonstration mode will be cancelled and the display will disappear.

To return to the demonstration mode:

When the unit is in the power stand-by mode, press the X-BASS button again.

Note:

When the power is on, the X-BASS button can be used to select the extra bass mode (see page 23).

„To turn the power on

Press the ON/STAND-BY button on the main unit or the ON/ (STAND-BY) button on the remote control.

To set the unit to stand-by mode:

Press the ON/STAND-BY button on the main unit or the ON/ (STAND-BY) button on the remote control again.

Power indicator

Notes:

zFor the operation range and direction of the remote control, see page 16.

zWhen turning on the power right after it is set to the stand-by mode, wait a few seconds.

02/7/11 HT-CN300W_A_3.fm

Image 14

Contents HT-CN300W Contents Special notesAccessories Accessories„ General Precautions„ Volume control Do not remove the outer cover, as this may resultControls Controls and indicatorsIndicators „ Main unit with subwoofer Reference„ Front/Centre/Surround speakers „ Remote control sensorFull-Range Speaker Angle Adjusting Lever Label indication Speaker connections Speaker connectionsAerial connection AerialConnecting other equipment Connecting other equipment„ Connecting the TV „ Connecting the DVD playerTo select the colour TV system „ Connecting the camcorder, satellite receiver, etc. Video„ Selecting the colour TV system „ Plugging in the remote control Connecting to the AC socket„ Setting the AC voltage selector Before connectingConnections Connecting to the AC socket „ Setting the FM/AM span selector„ To turn the power on Placing Placing the speaker systemSpeaker system Perform steps 1 4 to mount other speakers Installing the speakers on the wallWall Changing the speaker angle„ How to open the remote control cover Preparing the remote control„ Battery installation „ Test of the remote control Precautions for battery use„ Operation buttons for the main unit HT-CN300WOperation buttons on the remote controlRemote control Operation buttons on„ Switching the operation buttons for the main unit „ Operation buttons for other equipmentMemory 1 buttons Initial setting for Memory 1 buttons„ Memory 1/2 buttons for other equipment Memory 2 buttonsMemorising the remote control buttons Remote Control Memorising the remote control buttonsMove the LEARN/TRANSMIT selector switch to Transmit „ Initialising the remote control buttonsUsing the supplied labels To readjust the clock Setting the clockBasic Operation Setting the clock To confirm the time displayDisplay control Sound controlEnjoy Surround Enjoy Surround Sound sound modeSound sound mode Virtual Acoustic effect StandardDynamic sound Stereo„ Sound mode „ To enjoy with dynamic soundBasic Operation Listening to the radio Auto tuningHT-CN300WListening to the radio To receive an FM stereo transmissionListening to a memorised station „ To scan the preset stations„ To erase all the contents of the preset Memory „ Memorising a stationSpeaker settings Speaker settings„ Speaker size setting Speaker type Speaker size„ Speaker delay setting Speaker type Adjustable rangeFL CT FR SW SL SR „ Speaker level setting„ Test tone Advanced Features Timer and sleep operation Timer and sleep operation„ Setting the timer Adjust the volume using the Volume or button„ Setting the sleep timer „ Operation Troubleshooting chartTroubleshooting chart „ Sound„ Cleaning the cabinet Error indicators and warningsMaintenance „ TV image„ Amplifier SpecificationsSpecifications „ SubwooferMemo Memo Sharp Corporation