Sharp HT-CN300W operation manual Placing the speaker system, Speaker system

Page 15

Placing the speaker system

HT-CN300W

The best surround effect will be achieved by placing each speaker at the same distance from the listening position.

It is recommended to arrange the speakers as shown below.

	Centre
Front	speaker	Front
speaker (left)		speaker (right)
Main unit
(subwoofer)
Surround		Surround
speaker (left)		speaker (right)

	Centre speaker
Same distance	Same distance

Front speaker (left)

Front speaker (right)

Notes:

zPlace the TV halfway between the front speakers.

zIt is recommended that the centre speaker be placed near the television.

zPlace the surround speakers at a position just above the height of your ears.

The supplied speakers may be placed beside or near the TV as they are magnetically shielded. However, colour variation may occur, depending on the type of the TV.

If colour variation occurs...

Turn off the TV (from the power switch).

After 15 - 30 minutes, turn the TV on again.

If the colour variation is still present...

Move the speakers further away from the TV.

Refer to the user's manual of the TV for details.

Example of speaker locations:

Installation	speaker system -
Speaker	- Placing the

14

02/7/11 HT-CN300W_A_3.fm

Image 15

Contents HT-CN300W Special notes ContentsAccessories AccessoriesDo not remove the outer cover, as this may result Precautions„ Volume control „ GeneralControls and indicators IndicatorsControls Reference „ Main unit with subwoofer„ Remote control sensor Full-Range Speaker Angle Adjusting Lever Label indication„ Front/Centre/Surround speakers Speaker connections Speaker connectionsAerial Aerial connectionConnecting other equipment Connecting other equipment„ Connecting the DVD player „ Connecting the TV„ Connecting the camcorder, satellite receiver, etc. Video „ Selecting the colour TV systemTo select the colour TV system Before connecting Connecting to the AC socket„ Setting the AC voltage selector „ Plugging in the remote control„ Setting the FM/AM span selector „ To turn the power onConnections Connecting to the AC socket Placing the speaker system Speaker systemPlacing Changing the speaker angle Installing the speakers on the wallWall Perform steps 1 4 to mount other speakersPrecautions for battery use Preparing the remote control„ Battery installation „ Test of the remote control „ How to open the remote control coverOperation buttons on HT-CN300WOperation buttons on the remote controlRemote control „ Operation buttons for the main unit„ Operation buttons for other equipment „ Switching the operation buttons for the main unitMemory 2 buttons Initial setting for Memory 1 buttons„ Memory 1/2 buttons for other equipment Memory 1 buttonsRemote Control Memorising the remote control buttons Memorising the remote control buttons„ Initialising the remote control buttons Using the supplied labelsMove the LEARN/TRANSMIT selector switch to Transmit To confirm the time display Setting the clockBasic Operation Setting the clock To readjust the clockSound control Display controlEnjoy Surround Sound sound mode Sound sound modeEnjoy Surround Stereo Acoustic effect StandardDynamic sound Virtual„ To enjoy with dynamic sound „ Sound modeTo receive an FM stereo transmission Auto tuningHT-CN300WListening to the radio Basic Operation Listening to the radio„ Memorising a station „ To scan the preset stations„ To erase all the contents of the preset Memory Listening to a memorised stationSpeaker type Speaker size Speaker settings„ Speaker size setting Speaker settingsSpeaker type Adjustable range „ Speaker delay setting„ Speaker level setting „ Test toneFL CT FR SW SL SR Adjust the volume using the Volume or button Timer and sleep operation„ Setting the timer Advanced Features Timer and sleep operation„ Setting the sleep timer „ Sound Troubleshooting chartTroubleshooting chart „ Operation„ TV image Error indicators and warningsMaintenance „ Cleaning the cabinet„ Subwoofer SpecificationsSpecifications „ AmplifierMemo Memo Sharp Corporation