Smeg TLS12 manual Precautions and General Recommendations

Page 5

PRECAUTIONS AND GENERAL RECOMMENDATIONS

1.Packing

The packaging materials are 100% recyclable and bear the recycling symbol . Adhere to local regulations when disposing of packaging material.

If necessary, the power cable may be replaced with an identical one obtained from our After- Sales Service. The power cable must only be replaced by a qualified technician.

2.Disposing of packaging and old washing machines

This appliance is marked according to the European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by

inappropriate waste handling of this product.

The symbol on the product, or on the documents accompanying the product, indicates that this appliance may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

Disposal must be carried out in accordance with local environmental regulations for waste disposal. For more detailed information about treatment, recovery and recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

The washing machine is built from reusable materials. It must be disposed of in compliance with current local waste disposal regulations.

Before scrapping, cut off the power cable so that the washing machine cannot be connected to the mains.

Remove detergent from compartment if you intend scrapping your washing machine.

4.Energy saving tips

Achieve the best use of energy, water, detergent and time by using the recommended maximum load size.

Do not exceed the detergent dosages indicated in the manufacturer’s instructions.

The Eco Ball - a special system in the outlet - will prevent detergent loss from the drum to avoid detergent loss into the environment.

Use “Prewash” for heavily soiled laundry only! Save detergent, time, water and energy consumption by not selecting “Prewash” for slightly to normally soiled laundry.

Pretreat stains with stain remover or soak dried in stains in water before washing to reduce the necessity of a hot wash program.

Save energy by using a 60° C instead of a 95° C wash programme or a 40° C instead of a 60° C wash programme.

Save energy and time by selecting a high spin speed to reduce the water content in laundry before using a tumble dryer (for machines with adjustable spin speed).

5.General recommendations

Do not leave the washing machine connected when not in use. Turn off the tap.

Before cleaning or carrying out maintenance switch off the washing machine and disconnect it from the mains supply.

3.Safety instructions

The washing machine is appropriate for indoor use only.

Do not store flammable fluids near the appliance.

Do not place electrical appliances on the worktop of your washing machine.

Children must not be allowed to play with or in the washing machine

Do not attempt to force the lid open.

6.EC Declaration of Conformity

This washing machine has been designed, constructed and distributed in compliance with the safety requirements of EC Directives: 73/23/EEC Low Voltage Directive

89/336/EEC EMC Directive 93/68/EEC CE Marking Directive

GB 3

Image 5
Contents Contents Programme Chart Consumption Data Before Using the Washing Machine Precautions and General Recommendations Before the First Wash Cycle Adjustable feetDescription of the Washing Machine Sort the laundry Preparation of the WashingStain removal Dyeing and bleachingLoading the laundry Dosage Detergents and AdditivesChoice of the right detergents and additives Using starch powder Where to put detergents and additivesUsing chlorine bleach Cleaning the FILTER/ Draining Residual Water Water inlet hose Detergent dispenserWater inlet hose filter Appliance interior Appliance exterior and control panelLid seal Water inlet hosesContains residues from Blocked see Care and Maintenance Problem Causes, Solutions, TipsSpin cycle Installation Animation appears during such update periodsRed indication lamp Description of red indicationsDescription Start/Pause light flashesIndication on Description Wait for the water to cool so as to avoid any accidents Before contacting After-Sales ServiceSpecify Removal of transport bracket Make sure there are no kinks in the hose Adjust the feetConnect the water inlet hose Connect the water drain hose Water stop anti-flooding systemBrown Live L Earth symbolTo fit a new plug, proceed as follows Polarized Plugs e.g pin, 13 amp plug conforming to BS 1363A