Alliance Laundry Systems FLW1525C Add Laundry Supplies, Set Fabric Selector, Set Wash Temperature

Step 3: Add Laundry Supplies

Open dispenser drawer. Measure and add low sudsing, high efficiency (HE) detergent (1), bleach (2) and fabric softener (3) to the dispenser drawer (refer to Figure 17). Close dispenser drawer.

IMPORTANT: If using non-HE detergent, avoid oversudsing by using 1/2 of the detergent manufacturer’s recommended amount.

	3
	2	1
		FLW2236N
		FLW2236N
1	Detergent
2	Bleach
3	Fabric Softener

Figure 17

CAUTION

Dispenser drawer requires a special tool for removal. Contact a service person if removal is necessary.

W236

Operation

Step 4: Set Fabric Selector

Push touchpad for NORMAL, PERM PRESS or DELICATES/BULKY cycle. Light indicates selection.

NOTE: Changes can be made to Fabric Selector setting up until the first fill is complete.

FLW2228N

Figure 18

Step 5: Set Wash Temperature

Push touchpad for HOT, WARM or COLD. Light indicates selection.

NOTE: Always follow manufacturer’s care labels.

FLW2229N

Figure 19

802951 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 17