Alliance Laundry Systems FLW1525C manual Standpipe Installation

Page 13

Standpipe Installation

Place the drain hose into the standpipe.

Remove the beaded tie-down strap from accessories bag and place around standpipe and drain hose and tighten strap to hold hose to standpipe. Refer to Figure 8. This will prevent the drain hose from dislodging from drain receptacle during use.

24 TO 36 in.

 

 

(61 TO 91.44 cm)

 

RECOMMENDED

 

HEIGHT

 

 

 

1

Flw1964N

 

 

 

 

FLW1964N

1

Standpipe 2 in. (5.08 cm) or 1-1/2 in. (4 cm)

Figure 8

Installation

Step 5: (Gravity Drain Models Only) Connect Drain Outlet to Drain System

Remove drain fitting (four inches long) and hose clamp from accessories bag. Insert drain fitting into drain outlet hose. Clamp hose and fitting.

Connect the drain fitting to a vented drain system using a flexible connection (obtain locally). Inside diameter of fitting is 1.53 in. (3.89 cm) and outside diameter is 1.66 in. (4.22 cm). The drain system must be vented to prevent an air lock or siphoning.

IMPORTANT: Increasing the drain hose length, installing elbows, or causing bends will decrease drain flow rates and increase drain times, impairing machine performance.

 

2

1

 

 

Flw1935N

 

FLW1935N

1

Drain Trough

2

Drain Outlet Hose

Figure 9

802951

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

11

Image 13
Contents Frontload Washers Page 802951 Contents Explanation of Safety Messages Safety InformationImportant Safety Instructions Safety Information Dimensions and Specifications InstallationTools Before You StartPosition Washer Near Installation Area Installing the WasherPosition and Level the Washer Water Supply Connect Fill HosesImportant do not cross thread or overtighten couplings Connecting HosesRisers Standpipe Installation Wipe Out Inside of Wash Drum Remove the Shock Sleeves and Shipping BraceSupply Injection System Control Function TestElectrical Requirements Plug In the WasherGrounding Instructions Check InstallationOperation Instructions OperationLoad Laundry Close Loading DoorAdd Laundry Supplies Set Wash TemperatureSet Fabric Selector Start Washer Set Soil LevelInsert Coins or Card To Insert MoneyInsert COINS/CARD Indicator LightsUser-Maintenance Instructions MaintenanceCleaning Foreign Object Trap Reinstallation of Shipping MaterialsWasher Symptom Possible Cause/Solution TroubleshootingTroubleshooting Contact Information Page Installer Checklist