Alliance Laundry Systems FLW1525C manual Before You Start, Tools

Page 8

Installation

Before You Start

Tools

For most installations, the basic tools you will need are:

1 2 3

4

5

D074I

1Wrench

2Screwdriver

3Pliers

4Socket Wrench

5Level

Figure 1

NOTE: An 8 in. (20.32 cm) coin drawer is required for coin operated models.

NOTE: If the washer is delivered on a cold day (below freezing), or is stored in an unheated room or area during the cold months, do not attempt to operate it until the washer has had a chance to warm up.

NOTE: Install dryer before washer. This allows room for attaching exhaust duct.

NOTE: Some moisture in the wash drum is normal. Water is used during testing at the manufacturer.

6

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

802951

Image 8
Contents Frontload Washers Page 802951 Contents Important Safety Instructions Safety InformationExplanation of Safety Messages Safety Information Installation Dimensions and SpecificationsBefore You Start ToolsPosition and Level the Washer Installing the WasherPosition Washer Near Installation Area Connect Fill Hoses Water SupplyConnecting Hoses Important do not cross thread or overtighten couplingsRisers Standpipe Installation Remove the Shock Sleeves and Shipping Brace Wipe Out Inside of Wash DrumControl Function Test Supply Injection SystemPlug In the Washer Electrical RequirementsCheck Installation Grounding InstructionsOperation Operation InstructionsLoad Laundry Close Loading DoorSet Fabric Selector Set Wash TemperatureAdd Laundry Supplies Set Soil Level Start WasherInsert Coins or Card To Insert MoneyIndicator Lights Insert COINS/CARDMaintenance User-Maintenance InstructionsReinstallation of Shipping Materials Cleaning Foreign Object TrapTroubleshooting Washer Symptom Possible Cause/SolutionTroubleshooting Contact Information Page Installer Checklist