Manual presetting (FM/AM)
You can preset up to 18 stations for FM and 6 stations for AM.
Ex.: Storing FM station of 92.50 MHz into preset number “04.”
1
]“92.50MHz”
2
[Hold]
“PRESET MODE” flashes.
3
]Selects preset number “04.”
“P04” flashes and “MEMORY” appears.
Selecting a preset station
1
or 2
The following features are available only for FM Radio Data System stations.
Searching for your favourite FM Radio Data System
You can tune in to a station broadcasting your favourite programme by searching for a PTY code.
1
[Hold]
The last selected PTY code appears.
2
]Select one of your favourite programme types or a PTY code (
17), and start searching.
If there is a station broadcasting a programme of the same PTY code as you have selected, that station is tuned in.
Standby receptions
TA Standby Reception
TA Standby Reception allows the unit to switch temporarily to Traffic Announcement (TA) from any source other than AM.
•The volume changes to the preset TA volume level if the current level is lower than the preset level (
15).
To activate TA Standby Reception
If the TP indicator lights up, TA Standby Reception is activated. If the TP indicator flashes, TA Standby Reception is not yet activated.
•To activate the reception, tune in to another station providing Radio Data System signals required for TA Standby Reception.
•To deactivate the reception, press T/P BACK again.
ENGLISH
7