Store stations manually Not work | JVC 1009DTSMDTJEIN, GET0623-006A

JVC 1009DTSMDTJEIN, GET0623-006A, GET0622-001A, KD-R415, KD-R316 Store stations manually Not work

–Bit rate of MP3/WMA: 32 kbps — 320 kbps

–Sampling frequency of MP3:

32 kHz, 44.1 kHz, 48 kHz (for MPEG-1)

16 kHz, 22.05 kHz, 24 kHz (for MPEG-2)

–Sampling frequency of WMA: 22.05 kHz, 32 kHz, 44.1 kHz, 48 kHz

•This unit can play back MP3 files recorded in VBR (variable bit rate).

•The maximum number of characters for:

–Folder names : 32 characters

–File names : 32 characters

–MP3 Tag : 64 characters

–WMA Tag : 32 characters

•This unit can recognize a total of 5 000 files, 255 folders (255 files per folder including folder without unsupported files), and of 8 hierarchies.

•This unit does not support SD card reader.

•This unit cannot recognize a USB device whose rating is other than 5 V and exceeds 500 mA.

•USB devices equipped with special functions such as data security functions cannot be used with the unit.

•Do not use a USB device with 2 or more partitions.

•This unit may not recognized a USB device connected through a USB card reader.

•This unit may not play back files in a USB device properly when using a USB extension cord.

•This unit cannot play back the following files:

–MP3 files encoded with MP3i and MP3 PRO format.

–MP3 files encoded in an inappropriate format.

–MP3 files encoded with Layer 1/2.

–WMA files encoded in lossless, professional, and voice format.

–WMA files not based on Windows Media® Audio.

General

FM/AM

Symptom			Remedy/Cause
Sound cannot be heard from the	• Adjust the volume to the optimum level.
Sound cannot be heard from the	• Adjust the volume to the optimum level.
speakers.	• Make sure the unit is not muted/paused (			6).
	• Check the cords and connections.
“PROTECT” appears on the display	Check to be sure the terminals of the speaker leads
and no operations can be done.	are covered with insulating tape properly, then
	reset the unit (		3).
	If “PROTECT” does not disappear, consult your JVC
	car audio dealer or a company supplying kits.

The unit does not work at all.	Reset the unit. (		3)

“AUX” cannot be selected.	Check the <SRC SELECT> = <AUX IN> setting.
	(	15)
SSM automatic presetting does	Store stations manually.
not work.

Static noise while listening to the	Connect the antenna firmly.
radio.
“AM” cannot be selected.	Check the <SRC SELECT> = <AM> setting. (			15)

ENGLISH

Store stations manually.