JVC KD-R218, GET0623-006A, KD-R415 VOL Adjust, VOL ADJ +05, TEL Muting, Muting OFF, AMP Gain *13

16

Category	Menu item	Selectable setting, [ Initial: Underlined ]
	VOL ADJUST	VOL ADJ –05— : Preset the volume adjustment level of
	Volume adjust	VOL ADJ +05	each source (except FM), compared to the
	(For KD-R412/	[ VOL ADJ 00 ]	FM volume level. The volume level will
	KD-R411/KD-R35)		automatically increase or decrease when
			you change the source.
			• Before making an adjustment, select the
			source you want to adjust.
			• “VOL ADJ FIX” appears on the display if
			“FM” is selected as the source.
	L/O MODE *11	• SUB.W	: Select if the REAR LINE OUT terminals are
	Line output mode		used for connecting a subwoofer (through
			an external amplifier).
		• REAR	: Select if the REAR LINE OUT terminals are
			used for connecting the speakers (through
			an external amplifier).
AUDIO	SUB.W FREQ *11, *12	• LOW	: Frequencies lower than 72 Hz are sent to the
	Subwoofer cutoff	• MID	subwoofer.
	frequency		: Frequencies lower than 111 Hz are sent to
		• HIGH	the subwoofer.
			: Frequencies lower than 157 Hz are sent to
			the subwoofer.
	SUB.W LEVEL *11, *12	SUB.W 00 —	: Adjust the subwoofer output level.
	Subwoofer level	SUB.W 08
		[ SUB.W 04 ]
	BEEP	• BEEP ON	: Activates the keypress tone.
		• BEEP OFF	: Deactivates the keypress tone.
	TEL MUTING	• MUTING 1/	: Select either one which mutes the sounds
	Telephone muting	MUTING 2	while using a mobile phone.
		• MUTING OFF	: Cancels.
	AMP GAIN *13	• LOW POWER	: VOLUME 00 – VOLUME 30 (Select if the
	Amplifier gain		maximum power of each speaker is less than
	control		50 W to prevent damaging the speakers.)
		• HIGH POWER	: VOLUME 00 – VOLUME 50
SRC SELECT	AM *14	• AM ON	: Enable “AM” in source selection.
	AM station	• AM OFF	: Disable “AM” in source selection.
	AUX IN *15	• AUX ON	: Enable “AUX IN” in source selection.
	Auxiliary input	• AUX OFF	: Disable “AUX IN” in source selection.

*11 For KD-R412/KD-R411/KD-R312/KD-R311.

*12 Displayed only when <L/O MODE> is set to <SUB.W>.

*13 The volume level automatically changes to “VOLUME 30” if you change to <LOW POWER> with the volume level is set higher than “VOLUME 30.”

*14 Displayed only when any source other than “AM” is selected.

*15 Displayed only when any source other than “AUX IN” is selected.

ENGLISH