Category | Menu item | Selectable setting, [ Initial: Underlined ] | ||
|
|
|
|
|
|
| FADER *3 | R06 – F06 [ 00 ] | : Adjust the front and rear speaker output |
|
|
|
| balance. |
|
|
|
|
|
|
| BALANCE *4 | L06 – R06 [ 00 ] | : Adjust the left and right speaker output |
|
|
|
| balance. |
|
|
|
|
|
|
| LOUD | • LOUD ON | : Boost low and high frequencies to produce a |
|
| Loudness |
| |
|
|
| • LOUD OFF | : Cancels. |
|
|
|
|
|
|
| AUX ADJUST *5 | AUX ADJ 00 — | : Adjust the auxiliary input level to avoid the |
|
| Auxiliary adjust | AUX ADJ 05 | sudden increase of the output level when |
|
| (For |
| changing the source to external component |
|
|
| connected to the AUX input jack on the | |
|
|
|
| control panel. |
|
| VOL ADJUST | VOL ADJ | : Preset the volume adjustment level of |
|
| Volume adjust | VOL ADJ +05 | each source (except FM), compared to the |
|
| (For | [ VOL ADJ 00 ] | FM volume level. The volume level will |
|
|
| automatically increase or decrease when you | |
AUDIO |
|
| change the source. | |
|
| source you want to adjust. | ||
|
|
|
| • Before making an adjustment, select the |
|
|
|
| • “VOL ADJ FIX” appears on the display if “FM” |
|
|
|
| is selected as the source. |
|
|
|
|
|
|
| L/O MODE | • SUB.W | : Select if the REAR LINE OUT terminals are |
|
| Line output |
| used for connecting a subwoofer (through an |
|
| mode |
| external amplifier). |
|
|
| • REAR | : Select if the REAR LINE OUT terminals are |
|
|
|
| used for connecting the speakers (through an |
|
|
|
| external amplifier). |
|
|
|
|
|
|
| SUB.W FREQ *6 | • LOW | : Frequencies lower than 72 Hz are sent to the |
|
| Subwoofer cutoff | • MID | subwoofer. |
|
| frequency | : Frequencies lower than 111 Hz are sent to the | |
|
|
| • HIGH | subwoofer. |
|
|
| : Frequencies lower than 157 Hz are sent to the | |
|
|
|
| subwoofer. |
|
|
|
|
|
|
| SUB.W LEVEL *6 | SUB.W 00 — | : Adjust the subwoofer output level. |
|
| Subwoofer level | SUB.W 08 |
|
|
|
| [ SUB.W 04 ] |
|
|
|
|
|
|
*3 If you are using a
*5 Displayed only when <AUX IN> is set to <AUX ON>.
*6 Displayed only when <L/O MODE> is set to <SUB.W>.
14
ENGLISH