JVC KD-R316 Wma to non-MP3 or WMA tracks, Display Folder that contains MP3/WMA tracks, Try again

USB device playback (for KD-R412/KD-R411/KD-R35)

Symptom	Remedy/Cause
Noise is generated.	The track played back is not an MP3/WMA track. Skip to
	another file. (Do not add the extension code <.mp3> or
	<.wma> to non-MP3 or WMA tracks.)
“READING” keeps flashing on	• Readout time varies depending on the USB device.
the display.	• Do not use too many hierarchy or folders.
	• Turn off the power then on again.
	• Reattach the USB device again.
“NO FILE” appears on the	Selected folder is an empty folder*. Select another
display.	folder that contains MP3/WMA tracks.
	* Folder that is physically empty or folder that contains
	data but does not contain valid MP3/WMA track.
“NOT SUPPORT” appears on the	Skip to the next track encoded in an appropriate format
display and track skips.	or to the next non-copy-protected WMA track.
Tracks/folders are not played	The playback order is determined by the write-in time
back in the order you have	stamp. The first track/folder written into the USB device
intended.	will be the first track/folder for playback.
• “CANNOT PLAY” flashes on	• Attach a USB device that contains tracks encoded in
the display.	an appropriate format.
• “NO USB” appears on the	• Reattach the USB device again.
display.
• The unit cannot detect the
USB device.
The correct characters are not	This unit can only display letters (upper case), numbers,
displayed (e.g. album name).	and a limited number of symbols.
While playing a track, sound is	The MP3/WMA tracks have not been properly copied
sometimes interrupted.	into the USB device.
	Copy MP3/WMA tracks again into the USB device, and
	try again.

JVC bears no responsibility for any loss of the data in the USB mass storage class device while using this System.

ENGLISH

23