JVC KD-R316, GET0623-006A, GET0622-001A, KD-R415, KD-R218, KD-R416, KD-R315, 1009DTSMDTJEIN Menu item

Category	Menu item
	TA VOLUME*5
	Traffic
	announcement
	volume
	P-SEARCH*5
	Programme
TUNER	search
	MONO *7
	Monaural mode
	IF BAND
	Intermediate
	frequency band
	FADER *8
	BALANCE *9
AUDIO	LOUD
	Loudness
	AUX ADJUST *10
	Auxiliary adjust
	(For KD-R312/
	KD-R311)

Selectable setting, [ Initial: Underlined ]

• VOLUME 00	–	: —
VOLUME 50	(or
VOLUME 00	–

VOLUME 30)*6

[VOLUME 15 ]

• SEARCH ON	: Activates Programme Search. ( 8)
• SEARCH OFF	: Cancels.

•MONO ON : Activate monaural mode to improve FM reception, but stereo effect will be lost.

•MONO OFF : Restore the stereo effect. ( 6)

• AUTO	: Increases the tuner selectivity to reduce
	interference noises between adjacent
	stations. (Stereo effect may be lost.)
• WIDE	: Subject to interference noises from adjacent
	stations, but sound quality will not be
	degraded and the stereo effect will remain.
R06 – F06	: Adjust the front and rear speaker output
[ 00 ]	balance.
L06 – R06	: Adjust the left and right speaker output
[ 00 ]	balance.
• LOUD ON	: Boost low and high frequencies to produce a
	well-balanced sound at a low volume level.
• LOUD OFF	: Cancels.
AUX ADJ 00 —	: Adjust the auxiliary input level to avoid the
AUX ADJ 05	sudden increase of the output level when
	changing the source to external component
	connected to the AUX input jack on the
	control panel.

*5	Only for FM Radio Data System stations.
*6	Depends on the amplifier gain control.
*7	Displayed only when the source is “FM.”
*8	If you are using a two-speaker system, set the fader level to “00.”
*9	For KD-R412/KD-R411/KD-R312/KD-R311: This adjustment will not affect the subwoofer output.

*10 Displayed only when <AUX IN> is set to <AUX ON>.

ENGLISH

15