JVC KD-R218, KD-R415 Basic operations, Tuner operations, Disc operations, Audio Amplifier Section

Page 4
GENERAL
Power Requirement:

Troubleshooting

 

Symptom

Remedy/Cause

 

Sound cannot be heard from the

• Adjust the volume to the optimum level.

 

speakers.

• Make sure the unit is not muted/paused.

 

 

• Check the cords and connections.

General

“PROTECT” appears on the display and

Check to be sure the terminals of the speaker leads are

no operations can be done.

covered with insulating tape properly, then reset the unit.

 

If “PROTECT” does not disappear, consult your JVC car audio

 

dealer or a company supplying kits.

 

 

 

This unit does not work at all.

Reset the unit. (See page 1.)

 

“AUX IN” cannot be selected.

Check the <SRC SELECT> = <AUX IN> setting. (See “Menu

 

 

operations” on page 3.)

 

SSM automatic presetting does not

Store stations manually.

FM/AM

work.

 

Static noise while listening to the radio.

Connect the antenna firmly.

“AM” cannot be selected.

Check the <SRC SELECT> = <AM> setting. (See “Menu

 

 

 

operations” on page 3.)

 

 

 

 

Disc cannot be played back.

Insert the disc correctly.

 

CD-R/CD-RW cannot be played back.

• Insert a finalized CD-R/CD-RW.

 

• Tracks on the CD-R/CD-RW cannot be

• Finalize the CD-R/CD-RW with the component which you

playback

skipped.

used for recording.

Disc can be neither played back nor

• Unlock the disc.

ejected.

• Eject the disc forcibly.

Disc sound is sometimes interrupted.

• Stop playback while driving on rough roads.

Disc

 

• Change the disc.

 

• Check the cords and connections.

 

 

 

“NO DISC” appears on the display.

Insert a playable disc into the loading slot.

 

“PLEASE” and “EJECT” appear

Press 0, then insert a disc correctly.

 

alternately on the display.

 

 

Disc cannot be played back.

• Use a disc with MP3/WMA tracks recorded in a format

 

 

compliant with ISO 9660 Level 1, Level 2, Romeo, or Joliet.

 

 

• Add the extension code <.mp3> or <.wma> to the file

 

 

names.

playback

Noise is generated.

Skip to another track or change the disc. (Do not add the

 

extension code <.mp3> or <.wma> to non-MP3 or WMA

 

tracks.)

A longer readout time is required

Do not use too many hierarchical levels and folders.

MP3/WMA

(“READING” keeps flashing on the

 

display).

 

Tracks are not played back in the order

Playback order is determined when the files are recorded.

you have intended.

 

 

 

 

The elapsed playing time is not correct.

This sometimes occurs during playback. This is caused by

 

 

how the tracks are recorded on the disc.

 

The correct characters are not

This unit can only display letters (upper case), numbers, and

 

displayed (e.g. album name).

a limited number of symbols.

 

The fuse blows.

Connect the red and black leads correctly.

 

Power cannot be turned on.

Check to make sure the yellow lead is connected.

 

No sound from the speakers.

Check to make sure the speaker output lead is not

 

 

shortcircuited.

More about this unit

Basic operations

If you turn off the power while listening to a track, playback will start from where it had been stopped previously next time you turn on the power.

If no operation is done for about 60 seconds after pressing MENU button, the operation will be canceled.

Tuner operations

During SSM search...

–All previously stored stations are erased and the

stations are stored anew.

–When SSM is over, the station stored in the lowest preset number will be automatically tuned in.

If you try to assign titles to more than 30 station frequencies, “NAME FULL” appears. Delete unwanted titles before assignment.

Disc operations

Caution for DualDisc playback

The Non-DVD side of a “DualDisc” does not comply with the “Compact Disc Digital Audio” standard. Therefore, the use of Non-DVD side of a DualDisc on this product may not be recommended.

General

This unit has been designed to reproduce CDs/ CD Texts, and CD-Rs (Recordable)/CD-RWs (Rewritable) in audio CD (CD-DA) and MP3/WMA formats.

If you change the source while listening to a disc, playback stops. Next time you select “CD” as the playback source, playback will start from where it had been stopped previously.

If the ejected disc is not removed within

15 seconds, the disc is automatically inserted again into the loading slot to protect it from dust.

Playing a CD-R or CD-RW

Use only “finalized” CD-Rs or CD-RWs.

This unit can play back multi-session discs; however, unclosed sessions will be skipped while playing.

Some CD-Rs or CD-RWs may not be played back on this unit:

–Discs are dirty or scratched.

–Moisture condensation has occurred on the lens inside the unit.

–The pickup lens inside the unit is dirty.

–The files on the CD-R/CD-RW are written using the “Packet Write” method.

–There are improper recording conditions (missing data, etc.) or media conditions (stained, scratched, warped, etc.).

CD-RWs may require a longer readout time since the reflectance of CD-RWs is lower than that of regular CDs.

Playing an MP3/WMA disc

This unit can play back MP3/WMA files with the extension code <.mp3> or <.wma> (regardless of the letter case—upper/lower).

This unit can show the names of albums, artists (performer), and tag (Version 1.0, 1.1, 2.2, 2.3, or 2.4) for MP3 files and for WMA files.

This unit can display only one-byte characters. No other characters can be correctly displayed.

This unit can play back MP3/WMA files meeting the conditions below:

–Bit rate: 8 kbps — 320 kbps

–Sampling frequency:

48 kHz, 44.1 kHz, 32 kHz (for MPEG-1)

24 kHz, 22.05 kHz, 16 kHz (for MPEG-2)

–Disc format: ISO 9660 Level 1/ Level 2, Romeo, Joliet, Windows long file name

The maximum number of characters for file/folder names vary depending on the disc format used (includes 4 extension characters—<.mp3> or <.wma>).

–ISO 9660 Level 1: up to 12 characters; ISO 9660 Level 2: up to 31 characters; Romeo: up to 128 characters; Joliet: up to 64 characters; Windows long file name: up to 128 characters

This unit can recognize a total of 512 files, 255 folders, and 8 hierarchical levels.

This unit can play back files recorded in VBR (variable bit rate).

Files recorded in VBR have a discrepancy in the elapsed time display, and do not show the actual elapsed time. In particular, this difference becomes noticeable after performing the search function.

This unit cannot play back the following files:

–MP3 files: encoded in MP3i and MP3 PRO format; an inappropriate format; layer 1/2.

–WMA files: encoded in lossless, professional, and voice format; not based upon Windows Media® Audio; copy-protected with DRM.

–Files which have data such as AIFF, ATRAC3, etc.

The search function works but search speed is not constant.

Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

Installation/connection

Sound is distorted.

• Check to make sure the speaker output lead is grounded.

 

• Check to make sure the “–” terminals of L and R speakers

 

are grounded in common.

Noise interfere with sounds.

Check to make sure the rear ground terminal connected to

 

the car’s chassis is using shorter and thicker cords.

This unit becomes hot.

• Check to make sure the speaker output lead is grounded.

 

 

• Check to make sure the “–” terminals of L and R speakers

 

 

are grounded in common.

 

This unit does not work at all.

Reset the unit. (See page 1.)

Specifications

AUDIO AMPLIFIER SECTION

Power Output:

20 W RMS × 4 Channels at 4 Ω and ≤ 1% THD+N

Signal-to-Noise Ratio:

80 dBA (reference: 1 W into 4 Ω)

Load Impedance:

4 Ω (4 Ω to 8 Ω allowance)

Tone Control Range:

 

CD PLAYER SECTION

 

Type:

Compact disc player

Signal Detection System: Non-contact optical pickup

 

(semiconductor laser)

Number of channels:

2 channels (stereo)

Frequency Response:

5 Hz to 20 000 Hz

Dynamic Range:

93 dB

Signal-to-Noise Ratio:

98 dB

Wow and Flutter:

Less than measurable limit

Maintenance

How to clean the connectors

Wipe the connectors with a cotton swab or cloth moistened with alcohol.

Connectors

Moisture condensation

Moisture may condense on the lens inside the unit. Eject the disc and leave the unit turned on for a few hours until the moisture has evaporated.

To keep discs clean

Wipe in a straight line from center of disc to edge. Do not use liquid cleaners, thinners, or benzene.

To play new discs

Remove any rough areas from the inner and outer edges of the disc.

Do not use the following discs:

Single CD—8 cm (3-3/16”) disc

Warped disc

Disc with sticker and sticker residue

Disc with stick-on label

Unusual shape disc

C-thru Disc (semi-transparent disc)

Disc with transparent or semi-transparent parts on its recording area

Bass:

±12 dB (60 Hz, 80 Hz, 100 Hz, 200 Hz)

 

Q1.0, Q1.25, Q1.5, Q2.0

Middle:

±12 dB (0.5 kHz, 1.0 kHz, 1.5 kHz,

 

2.5 kHz)

 

Q0.75, Q1.0, Q1.25

Treble:

±12 dB (10.0 kHz, 12.5 kHz, 15.0 kHz,

 

17.5 kHz)

 

Q (Fixed)

Frequency Response: 40 Hz to 20 000 Hz Line-Out Level/Impedance:

2.5V/20 kΩ load (full scale)

Subwoofer-Out Level/Impedance:

2.5V/20 kΩ load (full scale)

Output Impedance: 1 kΩ

Other Terminal:

AUX (auxiliary) input jack

TUNER SECTION

 

Frequency Range:

 

FM: 87.5 MHz to 107.9 MHz

MP3 Decoding Format: MPEG1/2 Audio Layer 3

Max. Bit Rate: 320 kbps

WMA (Windows Media® Audio) Decoding Format: Max. Bit Rate: 192 kbps

Operating Voltage: DC 14.4 V (11 V to 16 V allowance)

Grounding System: Negative ground Allowable Operating Temperature:

0°C to +40°C (32°F to 104°F)

Dimensions (W × H × D): Installation Size (approx.):

182 mm × 52 mm × 160 mm (7-3/16” × 2-1/16” × 6-5/16”)

Panel Size (approx.):

188 mm × 58 mm × 6 mm (7-7/16” × 2-5/16” × 1/4”)

Having TROUBLE with operation?

Please reset your unit

Still having trouble??

Call 1-800-252-5722 (USA ONLY)

http://www.jvc.com

(with channel interval set to 100 kHz or

200 kHz)

87.5 MHz to 108.0 MHz

(with channel interval set to 50 kHz)

AM: 530 kHz to 1 710 kHz

(with channel interval set to 10 kHz)

531 kHz to 1 602 kHz

(with channel interval set to 9 kHz)

[FM Tuner]

Usable Sensitivity: 9.3 dBf (0.8 μV/75 Ω)

50 dB Quieting Sensitivity: 16.3 dBf (1.8 μV/75 Ω)

Alternate Channel Selectivity (400 kHz): 65 dB

Frequency Response: 40 Hz to 15 000 Hz

Stereo Separation: 40 dB

[AM Tuner]

Sensitivity/Selectivity: 20 μV/40 dB

Mass (approx.): 1.3 kg (2.9 lbs) (excluding accessories)

Design and specifications are subject to change without notice.

If a kit is necessary for your car, consult your telephone directory for the nearest car audio speciality shop.

4

Image 4
Contents How to forcibly eject a disc Preparing the remote controller RM-RK50Initial setting For customer UseSelecting a preset station Assigning title to a station Automatic presetting FMManual presetting FM/AM Using the remote controllerWhen installing the unit without using the sleeve Precautions on power supply and speaker connectionsConnecting the external amplifier or subwoofer In-dash mountingBasic operations Tuner operationsDisc operations Audio Amplifier SectionKD-R412/KD-R411/ KD-R35/KD-R312/KD-R311 For safety Temperature inside the carBattery Products To obtain the best possible performance from the unitContents Canceling the display demonstration Setting the clockButton Basic operationsFor KD-R412 KD-R411/KD-R35 When an FM stereo broadcast is hard to receive Automatic presetting FMListening to the radio Manual searchManual presetting FM/AM Selecting a preset stationStandby receptions TA Standby ReceptionListening to a disc Tracing the same programmeAutomatic station selection PTY Standby ReceptionTo cancel repeat play or random play, select Selecting a track/folderSelecting the playback modes Selects folder of the MP3/WMA Selects trackSource or detach the USB device Stopping playback and detaching the USB deviceIf a USB device has been attached Connecting an external component to the AUX input jack Adjust the volumeListening to the other external components Mm stereo mini plug not supplied Portable audio player EtcInstalling the lithium coin battery CR2025 Using the remote controller For KD-R412/KD-R411Before using the remote controller Selecting a preset sound mode Storing your own sound modeSelectable setting, Initial Underlined Menu operationsMenu item Selectable setting, Initial Underlined Menu item VOL Adjust VOL ADJ +05TEL Muting MutingMore about this unit Basic operationsTuner operations Disc operationsPlaying an MP3/WMA disc Preset sound mode ToneMaintenance Troubleshooting Symptom Remedy/CauseA limited number of symbols JolietFile names Longer readout time isWma to non-MP3 or WMA tracks Display Folder that contains MP3/WMA tracksBack in the order you have Intended Will be the first track/folder for playbackSpecifications Power Requirement Operating Voltage Type Compact disc playerNon-contact optical pickup Max. Bit Rate 192 kbpsHaving Trouble with operation? Precautions on power supply and speaker connections In-dash mounting / Montage encastréRemoving the unit / Retrait de l’appareil BSleeve / Manchon ×1This unit does not work at all. Have you reset your unit? For KD-R414 Using the remote controller Selecting the playback modesStopping playback and detaching the USB device SpaceAMP Gain *7 LOW Power High PowerSleeve Dimmer OFFDisc/USB operations GeneralKD-R416 / KD-R415 KD-R316 / KD-R315 How to read this manual For KD-R416/KD-R415 Select Demo OFF Finish the procedure Preparing the remote controller RM-RK50 Replacing the lithium coin batteryEjects the disc Control dial Loading slot Main unitFor KD-R416 KD-R415 Station Selecting a preset station Using the remote controller To cancel the prohibition, repeat the sameStopping playback and ejecting the disc StationsMP3/WMA Listening to a USB device For KD-R416/KD-R415 Listening to the other external components Frequency 100 Adjust the hour, then the minute Clock setting Activate monaural mode to improve FMMonaural Reception, but stereo effect will be lost Mode Press BackSUB.W Freq *6 LOW Title assignment To erase the entire titleAvailable characters AMP Gain *7Maintenance More about this unit Playing MP3/WMA tracks from a USB device for KD-R416/KD-R415 Store stations manually Not work Connect the antenna firmly Radio AM cannot be selectedNon-MP3 or WMA tracks Elapsed playing time is notCorrect Appears on the display Folder that contains MP3/WMA tracksUSB device playback for KD-R416/KD-R415 Line-Out Level/Impedance KD-R315KD-R315 Output Impedance Other Terminal KD-R416/KD-R415, Antenna inputUSB Section for Generalcd Player Section KD-R416/KD-R415 EN, TH When installing the unit without using the sleeve / ่ In-dash mounting / การติดตั้งจอแบบ In-dashRemote lead / สายรีโมท Connector / ข้อต่อ Y*1 To an accessory terminal Fuse blockRear speaker left Rear speaker right