Fisher & Paykel NZ AU PAC SG installation instructions Using your QuickSmart washer

Page 10

Using your QuickSmart™ washer

■■Place the load evenly around the agitator (refer to ‘Sorting’ and ‘Loading’, page 19).

■■Remove fabric softener dispenser.

A. Detergent

■■	Follow the instructions on the detergent package.
	Follow the instructions on the detergent package.
■■	Use the mark on the agitator, nearest to the top of
	Use the mark on the agitator, nearest to the top of
	the clothes, as a guide to the correct amount
	of detergent to use (refer to ‘Detergent’, page 20).
■■	Pour the detergent down the centre of the
	Pour the detergent down the centre of the
	agitator stem.

■■Replace the fabric softener dispenser (this stops small articles falling down the centre of the agitator).

Fig.12 Adding detergent

QuickSmart™

WA65T60M (MW613), MW60, WA55T56M (MW513), WA75T56M (MWC12)

Fig.13 QuickSmart™ control panel

	B. Fabric softener
■■	If you wish to use fabric softener, place it in the dispenser
	on the top of the agitator (refer to page 21).
	Important!

Fabric softener must not be used if you have selected the

ECO option (refer to page 14).

Fig.14 Adding fabric softener

Image 10

Contents Installation instructions Intelligence working for you Contents Location Installation instructionsUnpacking Drain hoseLevelling your machine Inlet hose replacementInlet hoses Cold supply onlyWater supply Clothes washer safetyAccessories and spare parts DrainingGetting started Before you do your first washDetergent Using your WashSmart washerFabric softener Wash options If you wish to stop your WashSmart washerWash cycles AdvanceUsing your QuickSmart washer WA65T60M MW613, MW60, WA55T56M MW513, WA75T56M MWC12Power If you wish to stop your QuickSmart washerLid lock LID Locked lightModel variations Default settingsBasic cycle descriptions To select the wash options Clothes care safeguardsWash options and advancing the cycle Wash progress lightsManual water level selection Water levelsAuto water level Wash options saving water and time Quick washSoak Delay StartWash options Nappy sanitisers/bleachWashing bulky items Washing woollensTo set your favourite cycle Favourite cycleFavourite cycle To use your favourite cycleCustomising the wash cycles To customise a cycleLoading Before you washSorting Lint givers Lint collectorsHow much detergent? DetergentChoosing the right detergent Adding the detergentHow the fabric softener is dispensed Cleaning the dispenserFabric softener How much fabric softener?To enter option adjustment mode Option adjustment modeChanging pre-set options Use the buttons on the panel to change the pre-set options Wash temperatures Rinse optionsAuto water fill level Controlled coldEnd of cycle beeps Light on OptionOut of balance recovery routine SpecificationsCleaning the inside of your washer Caring for your washer When you have finishedCleaning your washer Machine informationWasher sounds and beeps Automatic lint systemRecycling the wash water Saving waterWater saving tips Recycling the water from a deep rinseManual suds save with syphon back Return Hose to DrainHOT and Cold water temperature lights are flashing HOT water temperature light is flashingCold water temperature light is flashing High water level light is flashingLID Locked light is flashing Single beep every second and... possible solutionsIf your washer beeps for help Some lights are on but the pattern of lights is unfamiliarOperating problems Wash problems Dye transfer TanglingFisher & Paykel undertakes to Manufacturer’s WarrantyThese warranties do not cover For Australian Customers Please keep this user guide in a safe placeNew Zealand if you need assistance Before you call for service or assistance…Customer Care Australia if you need assistanceProduct details Dealer Suburb Town CountryPage Page NZ AU PAC SG