Fisher & Paykel NZ AU PAC SG installation instructions Wash temperatures, Rinse options

Page 26

24

Changing pre-set options

Wash temperatures

■■On the QuickSmart™ model the WARM temperature can be adjusted if you think it is too hot or too cold.

■■On the WashSmart™ model all wash temperatures can be individually adjusted.

Note: the hot and cold temperatures will be the same as the respective water supply temperatures.

1When in option adjustment mode, select the WASH TEMP you want to adjust.

2The wash progress lights show the temperature adjustment possible for that temperature.

■■Pressing the ADVANCE button will cause the wash progress light that is on to change.

■■Advancing the wash progress light will increase the wash temperature. If you keep pressing the ADVANCE button, the light will scroll back to the coldest setting available for that wash temperature.

Fig.36 Adjusting the temperature setting

Note: while WashSmart™ model is shown, the setting of the QuickSmart™ model is identical

Note: if you have a QuickSmart™ model and still can’t get the temperature you require, advance the progress light (while in the options adjustment mode) across to SPIN and manually adjust the flow of the taps.

Rinse options

You can change the pre-set rinse options on the HEAVY DUTY and REGULAR cycles of the WashSmart™ model, and on the HEAVY DUTY, REGULAR and WOOL cycles of the QuickSmart™ model.

The default rinse option on these cycles is a spray rinse followed by a deep rinse. The first step of the default rinse can be replaced with a short spin, or a deep rinse, by selecting another option.

Rinse options

		Rinse 1	Rinse 2

	MED spin light on	Deep	Deep
	MED spin light on	rinse	rinse
		rinse	rinse

	SLOW spin light on	Short	Deep
	SLOW spin light on	spin	rinse
		spin	rinse

	HOLD light on	Spray	Deep
	(default)	rinse	rinse

If you have a problem with impurities in your water supply you may get a better result if you change the rinse option to two DEEP rinses. If you wish to conserve water, change the rinse option to one DEEP rinse. If you want to conserve even more water, choose the ECO option.

Image 26

Contents Installation instructions Intelligence working for you Contents Location Installation instructionsUnpacking Drain hoseLevelling your machine Inlet hose replacementInlet hoses Cold supply onlyWater supply Clothes washer safetyAccessories and spare parts DrainingGetting started Before you do your first washFabric softener Using your WashSmart washerDetergent Wash options If you wish to stop your WashSmart washerWash cycles AdvanceUsing your QuickSmart washer WA65T60M MW613, MW60, WA55T56M MW513, WA75T56M MWC12Power If you wish to stop your QuickSmart washerLid lock LID Locked lightBasic cycle descriptions Default settingsModel variations To select the wash options Clothes care safeguardsWash options and advancing the cycle Wash progress lightsAuto water level Water levelsManual water level selection Wash options saving water and time Quick washSoak Delay StartWash options Nappy sanitisers/bleachWashing bulky items Washing woollensTo set your favourite cycle Favourite cycleFavourite cycle To use your favourite cycleCustomising the wash cycles To customise a cycleLoading Before you washSorting Lint givers Lint collectorsHow much detergent? DetergentChoosing the right detergent Adding the detergentHow the fabric softener is dispensed Cleaning the dispenserFabric softener How much fabric softener?Changing pre-set options Option adjustment modeTo enter option adjustment mode Use the buttons on the panel to change the pre-set options Wash temperatures Rinse optionsAuto water fill level Controlled coldEnd of cycle beeps Light on OptionOut of balance recovery routine SpecificationsCleaning the inside of your washer Caring for your washer When you have finishedCleaning your washer Machine informationWasher sounds and beeps Automatic lint systemRecycling the wash water Saving waterWater saving tips Recycling the water from a deep rinseManual suds save with syphon back Return Hose to DrainHOT and Cold water temperature lights are flashing HOT water temperature light is flashingCold water temperature light is flashing High water level light is flashingLID Locked light is flashing Single beep every second and... possible solutionsIf your washer beeps for help Some lights are on but the pattern of lights is unfamiliarOperating problems Wash problems Dye transfer TanglingThese warranties do not cover Manufacturer’s WarrantyFisher & Paykel undertakes to For Australian Customers Please keep this user guide in a safe placeNew Zealand if you need assistance Before you call for service or assistance…Customer Care Australia if you need assistanceProduct details Dealer Suburb Town CountryPage Page NZ AU PAC SG