Fisher & Paykel NZ AU PAC SG Manufacturer’s Warranty, Fisher & Paykel undertakes to

Page 38

36

Manufacturer’s Warranty

You automatically receive a 2 year Manufacturer’s Warranty with the purchase of this Product covering parts and labour for servicing within the country of purchase.

Fisher & Paykel undertakes to:

Repair or, at its option, replace without cost to the owner either for material or labour any part of the product, the serial number of which appears on the product, which is found to be defective within TWO YEARS of the date of purchase.

If your product qualifies, you also receive an additional EIGHT YEAR parts only warranty on your direct drive motor. This additional 8-year warranty commences on the day following the expiry of the 2-year Manufacturer’s Warranty and excludes the motor controller and labour. Fisher & Paykel will repair (as to parts) or, at its option, replace any direct drive motor (but not the motor controller) which is found to be defective within this additional warranty period. You will be responsible for any labour costs.

To see if your product qualifies for this additional warranty, refer to our website: www.fisherpaykel.com/smartdrive

Note

These warranties are an extra benefit and do not affect your legal rights.

These warranties DO NOT cover

AService calls which are not related to any defect in the product. The cost of a service call will be charged if the problem is not found to be a product fault. For example:

1.Correcting the installation, eg removal of bottom packer and transit bolts (front loading washers), levelling the machine, adjustment of the drain to correct siphoning, noises, crossed, kinked or leaking inlet hose connections, turning on water, noises caused by the waterhammer or power supplies.

2.Providing instruction on use of the product or changing the set-up of the product, eg instruction on correct use of detergents and fabric softeners.

3.Replacing fuses in, or correcting house wiring or correcting house plumbing, eg unblocking drains.

4.Correcting fault(s) caused by the user.

5.Noise or vibration that is considered normal, eg spin sounds, user warning beeps.

6.Correcting damage caused by pests, eg rats, cockroaches, etc.

7.Water on the floor due to incorrect loading or excessive suds.

8.Blocked pumps, removal of foreign objects/substances from the machine, including the pump and inlet hose filters, eg bra wires, bread tags, nails, grit, scrud, etc.

9.Correcting corrosion or discolouration due to chemical attack.

BDefects caused by factors other than:

1.Normal domestic use; or

2.Use in accordance with the product’s user guide.

CDefects to the product caused by accident, neglect, misuse or ‘act of God’.

DThe cost of repairs carried out by non-authorised repairers or the cost of correcting such unauthorised repairs.

Image 38
Contents Installation instructions Intelligence working for you Contents Location Installation instructionsUnpacking Drain hoseLevelling your machine Inlet hose replacementInlet hoses Cold supply onlyWater supply Clothes washer safetyAccessories and spare parts DrainingGetting started Before you do your first washFabric softener Using your WashSmart washerDetergent Wash options If you wish to stop your WashSmart washerWash cycles AdvanceUsing your QuickSmart washer WA65T60M MW613, MW60, WA55T56M MW513, WA75T56M MWC12Power If you wish to stop your QuickSmart washerLid lock LID Locked lightBasic cycle descriptions Default settingsModel variations To select the wash options Clothes care safeguardsWash options and advancing the cycle Wash progress lightsAuto water level Water levelsManual water level selection Wash options saving water and time Quick washSoak Delay StartWash options Nappy sanitisers/bleachWashing bulky items Washing woollensTo set your favourite cycle Favourite cycleFavourite cycle To use your favourite cycleCustomising the wash cycles To customise a cycleLoading Before you washSorting Lint givers Lint collectorsHow much detergent? DetergentChoosing the right detergent Adding the detergentHow the fabric softener is dispensed Cleaning the dispenserFabric softener How much fabric softener?Changing pre-set options Option adjustment modeTo enter option adjustment mode Use the buttons on the panel to change the pre-set options Wash temperatures Rinse optionsAuto water fill level Controlled coldEnd of cycle beeps Light on OptionOut of balance recovery routine SpecificationsCleaning the inside of your washer Caring for your washer When you have finishedCleaning your washer Machine informationWasher sounds and beeps Automatic lint systemRecycling the wash water Saving waterWater saving tips Recycling the water from a deep rinseManual suds save with syphon back Return Hose to DrainHOT and Cold water temperature lights are flashing HOT water temperature light is flashingCold water temperature light is flashing High water level light is flashingLID Locked light is flashing Single beep every second and... possible solutionsIf your washer beeps for help Some lights are on but the pattern of lights is unfamiliarOperating problems Wash problems Dye transfer TanglingThese warranties do not cover Manufacturer’s WarrantyFisher & Paykel undertakes to For Australian Customers Please keep this user guide in a safe placeNew Zealand if you need assistance Before you call for service or assistance…Customer Care Australia if you need assistanceProduct details Dealer Suburb Town CountryPage Page NZ AU PAC SG