Fisher & Paykel NZ AU PAC SG Customising the wash cycles, To customise a cycle

To customise a cycle

WashSmart™ model only

You can program your washer to remember the wash options you prefer for each wash cycle. For instance, you may want to set the REGULAR cycle to a COLD wash or set HEAVY DUTY to include a SOAK.

1Press POWER.

2Press the wash cycle button. Hold down for 2 seconds.

You will hear 2 quick beeps and the wash cycle light will flash.

3Select your wash options, eg COLD wash, SOAK.

4Press the wash cycle again to store your customised cycle.

To change your customised wash cycle simply repeat these steps.

When you are customising a wash cycle you can shorten or lengthen the wash time.

■■To shorten the wash time, press the ADVANCE button to reduce the number of wash progress lights that are illuminated.

■■To increase the wash time keep pressing the ADVANCE button until all the wash progress lights are illuminated (see page 12).

Note: unlike the FAVOURITE cycle you cannot customise a wash cycle to start at the RINSE or SPIN stage. On HEAVY DUTY you can only decrease the wash time.

Fig.30 Customising a wash cycle