Fisher & Paykel NZ AU PAC SG Using your WashSmart washer, Detergent, Fabric softener

Page 8

6

Using your WashSmart™ washer

■■Place the load evenly around the agitator (refer to ‘Sorting’ and ‘Loading’, page 19).

■■Remove fabric softener dispenser.

A. Detergent

■■	Follow the instructions on the detergent package.
	Follow the instructions on the detergent package.
■■	Use the mark on the agitator, nearest to the top of
	Use the mark on the agitator, nearest to the top of
	the clothes, as a guide to the correct amount
	of detergent to use (refer to ‘Detergent’, page 20).
■■	Pour the detergent down the centre of the
	Pour the detergent down the centre of the
	agitator stem.

■■Replace the fabric softener dispenser (this stops small articles falling down the centre of the agitator).

Fig.8 Adding detergent

WashSmart™

WA80T65G, WA70T60G, WA60T56G, WA55T56G, WA10T65G, WA85T60G, WA75T56G

C

Fig.9 WashSmart™ control panel

D

	B. Fabric softener
■■	If you wish to use fabric softener, place it in the dispenser
	on the top of the agitator (refer to page 21).
	Important!

Fabric softener must not be used if you have selected the
ECO or QUICK WASH option (refer to page 14).	Fig.10 Adding fabric softener

Image 8

Contents Installation instructions Intelligence working for you Contents Installation instructions UnpackingLocation Drain hoseInlet hose replacement Inlet hosesLevelling your machine Cold supply onlyClothes washer safety Accessories and spare partsWater supply DrainingGetting started Before you do your first washFabric softener Using your WashSmart washerDetergent If you wish to stop your WashSmart washer Wash cyclesWash options AdvanceUsing your QuickSmart washer WA65T60M MW613, MW60, WA55T56M MW513, WA75T56M MWC12Power If you wish to stop your QuickSmart washerLid lock LID Locked lightBasic cycle descriptions Default settingsModel variations Clothes care safeguards Wash options and advancing the cycleTo select the wash options Wash progress lightsAuto water level Water levelsManual water level selection Wash options saving water and time Quick washDelay Start Wash optionsSoak Nappy sanitisers/bleachWashing bulky items Washing woollensFavourite cycle Favourite cycleTo set your favourite cycle To use your favourite cycleCustomising the wash cycles To customise a cycleBefore you wash SortingLoading Lint givers Lint collectorsDetergent Choosing the right detergentHow much detergent? Adding the detergentCleaning the dispenser Fabric softenerHow the fabric softener is dispensed How much fabric softener?Changing pre-set options Option adjustment modeTo enter option adjustment mode Use the buttons on the panel to change the pre-set options Wash temperatures Rinse optionsControlled cold End of cycle beepsAuto water fill level Light on OptionOut of balance recovery routine SpecificationsCaring for your washer When you have finished Cleaning your washerCleaning the inside of your washer Machine informationWasher sounds and beeps Automatic lint systemSaving water Water saving tipsRecycling the wash water Recycling the water from a deep rinseManual suds save with syphon back Return Hose to DrainHOT water temperature light is flashing Cold water temperature light is flashingHOT and Cold water temperature lights are flashing High water level light is flashingSingle beep every second and... possible solutions If your washer beeps for helpLID Locked light is flashing Some lights are on but the pattern of lights is unfamiliarOperating problems Wash problems Dye transfer TanglingThese warranties do not cover Manufacturer’s WarrantyFisher & Paykel undertakes to For Australian Customers Please keep this user guide in a safe placeBefore you call for service or assistance… Customer CareNew Zealand if you need assistance Australia if you need assistanceProduct details Dealer Suburb Town CountryPage Page NZ AU PAC SG