LG Electronics WD-1042FH Preparation for washing, Press, Button, Turn, Check the drain and spin

TEST OPERATION

Preparation for washing.

Connect the power plug to the outlet.

Connect the inlet hose.

Press the	Press the	Press the
POWER ( )	PROGRAM ( P )	(START/PAUSE)
button.	button.	( ) button.

P

In case of coloreds	In case of coloreds
program.	program.

Check the water heating.	Check automatic reverse	Check the water supply.
	turn.

Press the button (WATER TEMP)

( ) and then the present temperature in displayed.

Check if the drum rotates to clockwise and counterclockwise.

Check shower because the water supplied on the door at first.

Check the drain and spin

Pre		1200
	Rinse hold	1000
	Super	800
Main		600
	Normal
		no Spin
(Wash)	(Rinse)	(Spin)

Power off

After power off, press the

DOOR OPEN ( ) button to check the door open.

Water removal

If SVC is needed, during check and remove

the remaining water by pulling out the hose cap.

Troubleshooting refer to (8-4.ERROR DISPLAY)

Assemble and disassemble refer to (10.Disassembly Instructions)

9