LG Electronics WD-1042FH, WD-1042F(H)(B), WD-1041(3)F(H)(B), WD-102(4)1(5)W(F)(H) Be turned off

■WD-8030(W)(F)(H)/WD-8040W(F)(H)/WD-1042F(H)/WD-803(4)0F(H)B/WD-102(4)2F(H)B

	If you press the	Start/Pause button when an error in displayed, any error except
	SENSOR PRESSURE S/W ERROR will disappear and the machine will change into pause status.
	In case of SENSOR PRESSURE S/W ERROR, THERMISTOR ERROR if the error is not resolved
	within 20 sec. In the case of other errors, if the error is not resolved within 4 min. power will be turned
	off automatically and the error code will blink. But in case of OVER FLOW ERROR , power will not
	be turned off.
	ERROR	SYMPTOM		CAUSE
1	WATER INLET	Pre		Water has not reached to the pre-set level within 4 min. since
	ERROR	Main		inlet valve operated, or water has not reached to the normal
				level within 25 min.
2	IMBALANCE	Rinse Hold		The appliance is tilted.
	ERROR	Super		Laundry is gathered to one side.
		Normal		Non-distributable things are put into the drum.
3	DRAIN ERROR	800	(1000)	Water has not drained enough within 5 min.
		600	(800)
		no Spin	(600)	( ) :WD-1042F(H)
		1000	for
			WD-8030F(H)B
		800
			WD-8040F(H)B
		600
			WD-1022F(H)B
		400	WD-1042F(H)B
		no spin
4	OVERFLOW	Coloreds		Water is automatically being pumped out because too much
	ERROR	Whites		water is in the tub.
		Rapid
5	SENSOR PRESSURE	Synthetic		The sensor pressure switch is out of order.
	S/W ERROR	Wool
		Delicate
6	DOOR OPEN			The Start/Pause button is pressed with the door open.
	ERROR	Door Lock		The door switch is out of order.
7	THERMISTOR	95 C
	ERROR	60 C		The thermistor is out of order.

40C Cold

95for WD-8030F(H)B

60WD-8040F(H)B

50WD-1022F(H)B

40 WD-1042F(H)B

30 Cold

24