DOOR HINGE ASSEMBLY
Two screw are unscrewed on the door and the door is disassembled.
The cabinet cover clamp is removed and the gasket is released.
Two screws are unscrewed on the door hinge. The door hinge is disassembled by pressing the door hinge arm inside the cabinet cover.
SWITCH ASSEMBLY, DOOR LOCK
The cabinet cover clamp is removed and the gasket is released.
Two screws are unscrewed.
The door lock S/W is disconnected from the wiring connector and the strap.
WHEN FOREIGN MATERIAL STACK BETWEEN DRUM AND TUB
The heater is removed.
The foreign material (wire, coin, etc) is removed by inserting the long bar in the hole.
46