■WD-1021(5)W(F)(H)/WD-1041(5)W(F)(H)
Rinse hold
•Rinse hold function can be selected by pressing the rinse button, and rinse hold lamp turns ON.
•Selection rinse hold washer waits without drain / spinning after rinse.
•To drain and spin, press rinse button, rinse hold lamp
turns off and drain / spinning starts.
For manual wash, rinse, and spin
•Use these buttons to change
washing method, rinse method spinning speed.
• When lamp is off, no selection has been made.
Wash
•Prewashing is available for coloreds, whites, and synthetic program.
Displaying abnormal operation
•Display the remaining time (Hour : Minute)
•The remaining time is reduced by the washing cycle.
•Error lamp is indicated the abnormal operation.
( 
, 
, 
)
•Display the reservation time.
Rinse | Spin | Water | T | |
Temp. | D | |||
|
|
How to set the Function
How to select water temperature
•Press the button to select water temperature.
•The water temperature can be selected [40°C
60°C Cold ] during coloreds, or synthetic programs.
•95°C is selected only for whites program.
•By pressing the button while operating the present temperature is displayed.
How to use delayed washing
•Press the button when reservation washing is needed.
• When the button is pressed, | is displayed. |
A maximum delay of | hours can be set. |
•Whenever pressing it, one hour increases.
•Use the power button to cancel it.
•Time delay means the time required from the present to the completion of washing.
12