LG Electronics WD-102(4)1(5)W(F)(H), WD-1042FH, WD-1042F(H)(B) Spin Trouble, Rinse, Spin Power

SPIN TROUBLE

■WD-1223(5)F(H)(B)/WD-1243(5)F(H)(B) / WD-1041(3)F(H)B / WD-102(4)1(5)F(H)B / WD-803(4)0F(H)B

(WASH) (RINSE)

(RINSE) (SPIN)

(1)

3
2	1

Check on the spinning, is the frequency of the
water level 248 or more. The frequency can be
checked by pressing the WASH			and	NO
RINSE (	) buttons at the same time on the
program.
		YES
When pressing RINSE (		), SPIN	and
POWER	buttons at the same time after power
off, press the START/PAUSE (			) button 2 times, YES

is the drum spinning at low speed?

NO

Is it disconnected, or disassembled?			YES
	Red:3-pin ( )
		NO
Check the motor connector. Is the resistance of
the terminal same as the figure?
			NO
MOTOR TERMINAL
Resistance of terminal:
		About 6.5

Check the sensor (Pressure) or hose (Sensor).

If the problem is on the sensor or the hose, replace the sensor or the hose.

Normal.

Correct the connector.

Replace the motor assembly (4681FR1241B)

YES

Replace the PWB assembly (Main).

37