Kenmore 110.4708, 110.4709 manual Pausing or Restarting

■Liquid detergent:

A

Selector in position for liquid detergent

A. Detergent type selector

■Powdered detergent:

Pausing or Restarting

1.To pause the washer at any time, select STOP.

2.To continue the cycle, select and hold START (for approximately 1 second).

Changing Cycles, Options and Modifiers

Not all Options and Modifiers are available with all Cycles. Available modifier selections will glow amber. Selectable options will glow amber. If an option or modifier is unavailable with the selected cycle, the light will not illuminate. Once an option or modifier is selected it will glow green. Preset or chosen options or modifiers will glow green.

Cycles, Options and Modifiers can be changed anytime before START is selected.

Options and Modifiers can be changed anytime after START is selected and before the start of the selected Option or Modifier.

A

Selector in position for powdered detergent

A. Detergent type selector

Chlorine bleach compartment

(Letter E in Dispenser Illustration)

Add no more than ²⁄₃ cup (160 mL) liquid chlorine bleach to this compartment. The bleach will be automatically diluted and dispensed at the best time during the first rinse after the wash cycle. This compartment cannot dilute powdered bleach.

■Always measure liquid chlorine bleach. Use a measuring cup with a pour spout; do not guess. Follow the manufacturer’s directions for proper use.

■Do not fill beyond the “MAX” level.

NOTE: Overfilling could cause garment damage.

Fabric softener compartment

(Letter F in Dispenser Illustration)

Pour measured liquid fabric softener into the fabric softener dispenser, if desired.

■Do not overfill. The dispenser holds ¼ cup (60 mL) of fabric softener.

■The fabric softener is dispensed in the rinse cycle. If 2nd Rinse or SkinCare Rinse II is selected, the fabric softener will be dispensed during the 2nd Rinse or SkinCare Rinse II.

■Do not use fabric softener dispensing balls in this washer. Dispensing balls will not operate correctly with this washer.

■Do not spill or drip any fabric softener onto the clothes.

■At the end of the cycle, a small amount of water may be left in the dispenser. This is normal.

NOTE: Use only liquid fabric softener in this dispenser.

To cancel a cycle and select a new cycle

1.Select STOP twice.

2.Select POWER.

3.Select desired cycle.

4.Select the desired OPTIONS and MODIFIERS.

5.Select and hold START (for approximately 1 second) to restart the washer at the beginning of the new cycle.

To cancel a cycle

1.Select STOP twice.

2.The washer powers down, the door unlocks, and clothes can be removed.

NOTE: If the water level or the temperature is too high, the washer will drain automatically before the door unlocks.

To change Options or Modifiers after the cycle has started

1.Select STOP once.

2.Select the desired OPTIONS or MODIFIERS.

3.Select and hold START (for approximately 1 second) to continue the cycle.

To drain the washer manually

1.Select STOP twice to cancel the wash cycle.

2.Select POWER.

3.Select RINSE/DRAIN & SPIN.

4.Press the 2ND RINSE button to remove any rinse options.

5.Select and hold START (for approximately 1 second) to begin the drain.

6.When the spin is complete, the door unlocks. Items can be removed from the washer.

14