Connect the Inlet Hoses, Route the Drain Hose

2.Once the bolt is loose, move it to the center of the hole and completely pull out the bolt, including the plastic spacer covering the bolt.

3.Once all 4 bolts are removed, discard the bolts and spacers. Then pull the power cord through the opening of the rear panel and close the hole with the attached cap.

4.Close the bolt holes with the 4 transport bolt hole plugs.

NOTE: If the washer is to be transported at a later date, call your local service center. To avoid suspension and structural damage to your washer, it must be properly set up for relocation by a certified technician.

Connect the Inlet Hoses

Make sure the washer drum is empty.

1.Attach the hose with the red color indicator to the Hot (left) inlet valve. Attaching the red coupling first makes it easier to tighten connection with pliers. Screw on coupling by hand until it is seated on the washer.

2.Attach the hose with the blue color indicator to the Cold (right) water inlet valve. Screw on coupling by hand until it is seated on the washer.

H C

H.Hot C. Cold

3.Using pliers, check the tightness of the hose couplings already attached to the washer.

NOTE: Do not overtighten. Damage to the coupling can result.

4.Attach the hose with the red color indicator to the hot water faucet. Screw on coupling by hand until it is seated on the washer.

5.Attach the hose with the blue color indicator to the cold water faucet. Screw on coupling by hand until it is seated on the washer.

6.Using pliers, tighten the couplings with an additional two-thirds turn.

NOTE: Do not overtighten. Damage to the coupling can result.

7.Turn on the water faucets and check for leaks.

NOTE: Replace inlet hoses after 5 years of use to reduce the risk of hose failure. Record hose installation or replacement dates on the hoses for future reference.

Periodically inspect and replace hoses if bulges, kinks, cuts, wear, or leaks are found.

Route the Drain Hose

Proper routing of the drain hose protects your floors from damage due to water leakage. Read and follow these instructions.

Remove drain hose from washer cabinet

Gently pull the corrugated drain hose from the shipping clips.

Laundry tub drain or standpipe drain

Connect the drain hose form to the corrugated drain hose.

A. Snap either end of the drain hose form to the drain hose at the point where the corrugation begins.

B. Bend drain hose over drain hose form and snap into place.

110.4708, 110.4709, 110.4708 specifications

The Kenmore 110.4708 and 110.4709 are top-loading washing machines that stand out in the Kenmore lineup for their reliable performance and user-friendly features. Both models boast a robust design that ensures durability and efficiency, making them popular choices for households seeking dependable laundry solutions.

One of the main features of the Kenmore 110.4708 and 110.4709 is their large capacity. With a 3.5 cu. ft. drum, these machines can handle sizeable loads, allowing users to wash more clothes in one cycle, thereby saving time and energy. The high-efficiency design also means that these washers use less water and detergent compared to older models, making them environmentally friendly options as well.

Both models incorporate a range of wash cycles to accommodate different fabrics and soil levels. From delicate items to heavily soiled work clothes, users can choose from various settings, including normal, perm press, and delicate. This versatility ensures that all types of garments receive the appropriate care during washing.

Another noteworthy aspect is the easy-to-use control panel. With straightforward dial settings and options, users can quickly select the desired cycle and adjust water levels without any confusion. The large lid also makes loading and unloading laundry effortless, contributing to overall user convenience.

In terms of technology, the Kenmore 110.4708 and 110.4709 feature an advanced agitator system that efficiently distributes water and detergent throughout the wash, improving cleaning performance. These models also come equipped with a dual-action agitator that helps to lift and separate clothes, enhancing their ability to remove tough stains.

Energy efficiency is another strong suit of these washers. Both models are Energy Star certified, meaning they meet strict energy efficiency guidelines set by the U.S. Environmental Protection Agency. This certification assures users that they are reducing their environmental impact while also saving on utility bills.

In summary, the Kenmore 110.4708 and 110.4709 models exemplify the perfect combination of capacity, versatility, and energy efficiency. Their durable construction, user-friendly controls, and advanced washing technology make them excellent choices for households seeking reliable and efficient laundry appliances. These characteristics not only improve the washing experience but also foster a commitment to sustainability, making them a smart addition to any home.