Whirlpool WTW8800YC, WTW8800YW warranty Control Panel and Features, Deep Clean with Heater

Page 4

CONTROL PANEL AND FEATURES

1

2

3

4

5

Not all features and cycles are available on all models.

1POWER BUTTON

Press to turn the washer ON. Pressing once while the washer is on will cancel the current cycle, pressing twice will turn the washer OFF.

2WASH CYCLE KNOB

Turn the Wash Cycle knob to select a cycle for your laundry load. See “Cycle Guide” for detailed descriptions of cycles.

3TIME/STATUS DISPLAY

The Estimated Time Remaining display shows the time required for the cycle to complete. Factors such as load size and water pressure may affect the time shown in the display. Overloading, unbalanced loads, or excessive suds may cause the washer to adjust the cycle time, as well.

If you have set a delay start to the cycle, the Estimated Time Remaining display will show the delay time adjusted.

When the cycle is complete, the Done indicator will light until the lid is opened.

The Lid Lock indicator lights up when the lid is locked and cannot be opened. If you need to open the lid, press START/PAUSE. The lid will unlock once the washer movement has stopped. This may take several minutes if the load was spinning at high speed. Press START/ PAUSE again to restart the cycle.

4ECO MONITOR

Your washer is specially designed to conserve energy and water. Each cycle, along with any selected options, will result in different energy and water usage. To use the Eco Monitor, choose the best cycle for the load being washed, then adjust temperature and spin speed options to improve the energy usage within that cycle.

5START/PAUSE BUTTON

Press to start the selected cycle; press again to pause a cycle.

6CYCLE OPTIONS

You may add or remove options for each cycle. Not all options can be used with all cycles, and some are preset to work with certain cycles.

ECOBOOST

The EcoBoost option allows you to increase your energy savings on your wash cycles. When this option is used, the wash cycle will use cooler wash water than the selected cycle and may increase the spin speed for faster drying.

7

6

EXTRA RINSE

This option can be used to automatically add a second rinse to most cycles.

DEEP CLEAN with HEATER

The Deep Clean with Heater option helps to ensure better soil and stain removal. Deep Clean uses a heater within the washer to maintain the selected temperature setting throughout the wash period. This option will add some additional time to the cycle based on which temperature is selected. It is a preset cycle setting on the Sanitary cycle. Deep Clean with Heater may be selected as an option with other cycles.

DISPENSERS

Press this button to set the dispensers for Oxi, Fabric Softener, or both so that the selected laundry product is added to the load at the correct time.

CYCLE SIGNAL

Use this option to adjust volume of the signal that sounds at end of cycle. A louder signal is helpful in removing items as soon as cycle is complete.

Press and hold the CYCLE SIGNAL button to illuminate the washer basket, making loading and unloading easier. The light comes on when the lid is opened, and turns off automatically when the lid is closed or when you press and hold the button again. If the lid is left open, the drum light will turn off on its own after a few minutes. If you turn on the drum light while the lid is closed, it will not automatically time out. You must press and hold the CYCLE SIGNAL button again to turn it off.

DrumLight

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Table of Contents Washer Safety Cleaning with Less Water Automatic Load Size Sensing WHAT’S NEW Under the LID?Not all features and cycles are available on all models Control Panel and FeaturesDeep Clean with Heater High Efficiency HE detergent dispenser When you select a cycle, its default settings will light upLiquid fabric softener dispenser Items to wash Cycle Wash Spin Soil Available Cycle Details Cycle GuideOptions Hot High Heavy Deep Clean HotHot High No SpinLoad laundry into washer Using Your WasherHelpful Tips Press Power to turn on washer Add HE detergent to dispenserAdd liquid chlorine bleach or Oxi product to dispenser Add liquid fabric softener to dispenserSelect cycle Select cycle modifiers Washer Maintenance Cleaning Your Top Loading WasherSelect cycle options Press START/PAUSE to begin wash cycleChlorine Bleach Procedure Alternative Description of Clean Washer Cycle OperationCleaning the Dispensers Cleaning the Outside of the WasherTroubleshooting If you experience Possible Causes SolutionVibration or Off-Balance Water LeaksTroubleshooting Water. See Using Your Washer for loading recommendations If you experience Possible causesReduce tangling by mixing types of load items. Use Recommended cycle for the type of garments being washedOn load size and soil level Operation Products dispensing too soon Error Code Appears in DisplayAt the end of the cycle Whirlpool Corporation Laundry Warranty Sécurité DE LA Laveuse Quoi DE Neuf Sous LE COUVERCLE? Choix du détergent appropriéTableau DE Commande ET Caractéristiques Power Button Bouton de mise sous tensionTIME/STATUS Display Affichage de durée/statut ECO Monitor Éco-MoniteurCycle Modifiers Réglages des programmes Soil Level Niveau de saletéSpin Speed Vitesse d’essorage Wash Temp Témperature de lavage’essorage Disponibles Saleté Guide DE ProgrammesLavage De lavage Utiliser ce programme à l’issue de Signal sonore retentit. Pour réglerPas de Chaque série de 30 lavages pourTrier et préparer le linge Utilisation DE LA LaveuseConseils utiles Charger les vêtements dans la laveuse Verser le détergent HE Dans le distributeurPour annuler un programme différé Pour choisir une heure de lavage différéLe programme de lavage ne commence Wash Temp Température Tissus suggérés De lavage Hot Chaude Warm TièdeCool Fraîche Cold FroideEntretien DE LA Laveuse Nettoyage de la laveuse à chargement par le dessusHivérisation de la laveuse Important Pour éviter tout dommage, installerRemise en marche de la laveuse Dépannage Vibrations ou déséquilibreFuites d’eau La laveuse ne fonctionne pas comme prévuLa laveuse ne fonctionne pas comme prévu suite Solution Si les phénomènesSaleté de la charge Dépannage Réapparaît, faire un appel de service Un code d’erreur apparaît sur l’afficheurGarantie DES Appareils DE Buanderie DE Whirlpool Corporation U.S.A U.S.A. and Canada
Top Page Image Contents