Description of the appliance
Position E corresponds to the ENERGY SAVING programme at approx. 67°C for normally soiled laundry, extended washing time (cannot be combined with STAIN and QUICK).
Position 40°C Easy to iron.
In this position the laundry is gently washed and spun to avoid any creasing. In this way ironing is easier.
Position COLD = cold wash
ON/OFF button
Press this button to switch the machine on. Press it again to switch the machine off.
Mains-on light
This light comes on when the ON/OFF button is pressed, and goes out when it is pressed again.
START/PAUSE button
This button has three functions:
a)Start
After having selected the required programme, press this button to start the machine; the corresponding pilot light stops flashing.
b)Pause
To interrupt a programme which is running, press the START/PAUSE button: the corresponding pilot light will start to flash.
To restart the programme from the point at which it was interrupted, press the START/PAUSE button again.
c)Empty out water
At the end of a programme which ends with water in the drum (RINSE HOLD option), or after the “soak” programme, press the START/PAUSE button to empty out the water: after the soak programme, the machine will empty only; after RINSE HOLD programmes, the machine will empty and spin.
DELAY START button
The wash programme can be delayed from 1 hour up to a maximum of 24 hours.
The button must be pressed after selecting the programme and before pressing the START/PAUSE button.
The figures indicating the delay appear for about 3 seconds in the dis- play. The duration of the selected wash programme is then displayed.
13