Electrolux 12700 VI manual Tips for environmental protection

Page 9

Tips for environmental protection

To save water, energy and to help protect the environment, we recommend that you follow these tips:

Normally soiled laundry may be washed without prewashing in order to save detergent, water and time (the environment is protected too!).

Use the energy saving programme when washing normally soiled garments.

The machine works more economically if it is fully loaded (for both washing and drying cycles).

When small loads are washed, use only half to two thirds of the rec- ommended amount of detergent.

The machine will consume less energy if the laundry is adequately spun before being dried.

With adequate pre-treatment, stains and limited soiling can be removed; the laundry can then be washed at a lower temperature.

9

Image 9
Contents Lavamat 12700 VI Turbo Dear customer Contents Programme charts Building-in Technical data Service & Spare Parts Guarantee ConditionsSafety instructions General safetyInstallation During use Child safetyDisposal Packaging materialsMachine Tips for environmental protection Main features of your washer-dryer Front view Description of the applianceControl panel Programme selector dialSelector is divided into 5 sections ON/OFF button Delay Start buttonMains-on light START/PAUSE buttonProgramme Option buttons Drying Time buttonThis function cannot be used with Quick and Prewash PrewashProgramme progress display DisplayOpening the door after the programme has started Cancelling/Altering a programmeBefore the first wash Detergent dispenser drawerSorting out and preparing the laundry Preparing the wash cycleTypes of fabric and care labels Weight of laundryCotton Synthetics Easy-caresDelicates Which detergent? Detergents and additivesTraditional Powders Which form?Load Preparing the drying cycleGarments not suitable for drying As a dryer, the machine works on the condensation principleDuration of the drying cycle Drying symbols on garment labelsModification of the drying time Fibre residueAdditional drying Switching the machine on How to washLoad the laundry Add detergent and additiveSelection of the desired wash programme Selection of the Spin Speed or Rinse Hold optionSelection of the Extra Rinse option Selection of the Delay Start option If the delay start option has been selected, the machineStarting the programme How to dry At the end of the programmeDrying only NON-STOP programme Automatic washing and dryingWash programmes Programme chartTo empty press Special programmesDrying Periodical cleaning Cleaning and maintenanceAfter each wash ExteriorDoor seal Drain filterWater inlet filter Emergency emptying out Frost precautionsSomething not working? TroubleshootingProblem Noisy Feet have not been E10 If grey stains remain on the laundry Unsatisfactory washing resultsFoam is still visible even after the last rinse White residue is left on the laundryTechnical data Water pressure 50 800 kPaThis appliance complies with the following EC directives Service & Spare Parts Service & Spare Parts08705 929 Help us to help youCustomer care Guarantee Conditions Italy Pordenone +39 1678 Sweden Stockholm +46 738 Slough +44 European GuaranteeSafety instructions for the installer Instructions for installation and electrical connectionRear view Front view and side viewUnpacking InstallationCarefully slide out the right poly- thene bag Tic bag and the previously removed screwPositioning LevellingSet the machine Water drainage Water inlet cold water connection onlyConnect the hose to a tap with a 3/4 thread Do not connect to a hot water supplyElectrical connections Interest of the environmentPermanent connection Green and Yellow Earth BlueBrown Live Building-in Preparation and assembly of the doorDoor HingesCounter-magnet Mounting the doorSee Fig. H Drill four fixing holes see Fig. GBuilding-in