Electrolux 12700 VI manual How to dry, At the end of the programme, Drying only

Page 30

How to wash

At the end of the programme

The machine stops automatically and a flashing zero is displayed. The END pilot light stays on.

If the RINSE HOLD option has been selected, the corresponding pilot light on the programme progress display stays on to indicate that the water must be emptied out before opening the door.

The pilot light of the START button flashes and a zero is displayed.

At the end of the programme (after draining), a flashing zero will appear on the display.

Switch the machine off by pressing the ON/OFF button. Turn the programme selector dial to RESET.

Remove the laundry from the drum.

Check that the drum is empty so as to avoid a subsequent wash being damaged by any forgotten items.

Close the water tap.

Leave the door open to prevent the formation of mildew and unpleas- ant smells.

How to dry

Drying only

Warning! Do not exceed the maximum laundry loads:

-2.25 kg for linen and cottons

-1.5 kg for easy-cares.

The water tap must be open and the drain hose must be positioned in the sink or connected to the drain pipe.

Depress the ON/OFF button to switch the machine on.

Select the drying programme (for cotton or easy-cares).

Depress the DRYING TIME button until the time you want appears in the display.

Press the START/PAUSE button to start the programme.

At the end of the cycle, turn the programme selector dial to RESET and press the ON/OFF button again to switch the appliance off.

Remove the laundry.

2.15

DRYING

TIME

30

Image 30

Contents Lavamat 12700 VI Turbo Dear customer Contents Programme charts Technical data Service & Spare Parts Guarantee Conditions Building-inSafety instructions General safetyInstallation Child safety During useDisposal Packaging materialsMachine Tips for environmental protection Main features of your washer-dryer Description of the appliance Front viewControl panel Programme selector dialSelector is divided into 5 sections Mains-on light Delay Start buttonON/OFF button START/PAUSE buttonDrying Time button Programme Option buttonsPrewash This function cannot be used with Quick and PrewashDisplay Programme progress displayCancelling/Altering a programme Opening the door after the programme has startedDetergent dispenser drawer Before the first washPreparing the wash cycle Sorting out and preparing the laundryCotton Weight of laundryTypes of fabric and care labels Synthetics Easy-caresDelicates Detergents and additives Which detergent?Which form? Traditional PowdersGarments not suitable for drying Preparing the drying cycleLoad As a dryer, the machine works on the condensation principleModification of the drying time Drying symbols on garment labelsDuration of the drying cycle Fibre residueAdditional drying Load the laundry How to wash Switching the machine on Add detergent and additiveSelection of the desired wash programme Selection of the Spin Speed or Rinse Hold optionSelection of the Extra Rinse option Selection of the Delay Start option If the delay start option has been selected, the machineStarting the programme How to dry At the end of the programmeDrying only Automatic washing and drying NON-STOP programmeProgramme chart Wash programmesSpecial programmes To empty pressDrying After each wash Cleaning and maintenancePeriodical cleaning ExteriorDoor seal Drain filterWater inlet filter Frost precautions Emergency emptying outTroubleshooting Something not working?Problem Noisy Feet have not been E10 Foam is still visible even after the last rinse Unsatisfactory washing resultsIf grey stains remain on the laundry White residue is left on the laundryTechnical data Water pressure 50 800 kPaThis appliance complies with the following EC directives 08705 929 Service & Spare PartsService & Spare Parts Help us to help youCustomer care Guarantee Conditions European Guarantee Italy Pordenone +39 1678 Sweden Stockholm +46 738 Slough +44Instructions for installation and electrical connection Safety instructions for the installerFront view and side view Rear viewCarefully slide out the right poly- thene bag InstallationUnpacking Tic bag and the previously removed screwPositioning LevellingSet the machine Connect the hose to a tap with a 3/4 thread Water inlet cold water connection onlyWater drainage Do not connect to a hot water supplyInterest of the environment Electrical connectionsPermanent connection Green and Yellow Earth BlueBrown Live Door Preparation and assembly of the doorBuilding-in HingesMounting the door Counter-magnetDrill four fixing holes see Fig. G See Fig. HBuilding-in