Electrolux 12700 VI manual Automatic washing and drying, NON-STOP programme

Page 31

Automatic washing and drying

(NON-STOP programme)

Warning! For NON-STOP programmes, it is also essential not to exceed the maximum load sizes of 2.25 kg for cotton and 1.5 kg for easy-cares.

Load the laundry.

Add detergent and additive.

Do not use a liquid detergent in a dosing device/ball, because the plas- tic material of the device will not withstand the high temperature dur- ing drying. Pour the liquid detergent directly into the main wash com- partment.

Switch the machine on by depressing the ON/OFF button.

Select the wash programme.

Select the required options by means of the relevant buttons. If possible, do not select a spin speed lower than that proposed by the appliance to avoid a too long drying time so saving energy.

When automatically washing and drying it is not possible to select a spin speed lower than 900 r.p.m. for cottons and 700 r.p.m. for synthetics.

Select the drying time.

Start the programme by depressing the START/PAUSE button.

At the end of the programme, turn the selector dial to RESET and press the ON/OFF button again to switch the machine off.

Remove the laundry.

31

Image 31

Contents Lavamat 12700 VI Turbo Dear customer Contents Programme charts Building-in Technical data Service & Spare Parts Guarantee ConditionsGeneral safety Safety instructionsInstallation During use Child safetyPackaging materials DisposalMachine Tips for environmental protection Main features of your washer-dryer Front view Description of the applianceProgramme selector dial Control panelSelector is divided into 5 sections START/PAUSE button Delay Start buttonON/OFF button Mains-on lightProgramme Option buttons Drying Time buttonThis function cannot be used with Quick and Prewash PrewashProgramme progress display DisplayOpening the door after the programme has started Cancelling/Altering a programmeBefore the first wash Detergent dispenser drawerSorting out and preparing the laundry Preparing the wash cycleSynthetics Easy-cares Weight of laundryTypes of fabric and care labels CottonDelicates Which detergent? Detergents and additivesTraditional Powders Which form?As a dryer, the machine works on the condensation principle Preparing the drying cycleLoad Garments not suitable for dryingFibre residue Drying symbols on garment labelsDuration of the drying cycle Modification of the drying timeAdditional drying Add detergent and additive How to washSwitching the machine on Load the laundrySelection of the Spin Speed or Rinse Hold option Selection of the desired wash programmeSelection of the Extra Rinse option If the delay start option has been selected, the machine Selection of the Delay Start optionStarting the programme At the end of the programme How to dryDrying only NON-STOP programme Automatic washing and dryingWash programmes Programme chartTo empty press Special programmesDrying Exterior Cleaning and maintenancePeriodical cleaning After each washDrain filter Door sealWater inlet filter Emergency emptying out Frost precautionsSomething not working? TroubleshootingProblem Noisy Feet have not been E10 White residue is left on the laundry Unsatisfactory washing resultsIf grey stains remain on the laundry Foam is still visible even after the last rinseWater pressure 50 800 kPa Technical dataThis appliance complies with the following EC directives Help us to help you Service & Spare PartsService & Spare Parts 08705 929Customer care Guarantee Conditions Italy Pordenone +39 1678 Sweden Stockholm +46 738 Slough +44 European GuaranteeSafety instructions for the installer Instructions for installation and electrical connectionRear view Front view and side viewTic bag and the previously removed screw InstallationUnpacking Carefully slide out the right poly- thene bagLevelling PositioningSet the machine Do not connect to a hot water supply Water inlet cold water connection onlyWater drainage Connect the hose to a tap with a 3/4 threadElectrical connections Interest of the environmentGreen and Yellow Earth Blue Permanent connectionBrown Live Hinges Preparation and assembly of the doorBuilding-in DoorCounter-magnet Mounting the doorSee Fig. H Drill four fixing holes see Fig. GBuilding-in