Electrolux 12700 VI manual Building-in, Preparation and assembly of the door, Door, Hinges

Building-in

This appliance has been designed to be built into the kitchen furniture.

600

The recess should have the dimen- sions shown in picture A.

	176,5
818	416

515

596

120

41 5

600
	.
570	min

820 min

A

	8	195
		160
5		90

Preparation and assembly of the door

The machine is originally pre- arranged for the assembly of a door opening from right to left.

In this case it is sufficient to screw in the hinges (1) and the counter- magnet (6) provided with the appli- ance, at the right level (Fig. B).

a) Door

	6
1	2	7
1
		3

4

5

The dimensions of the door should		23 8
be:		B
- width	595-598 mm
- thickness	16-22 mm

The height (C-Fig. C) depends on the height of the adjacent furniture's base.

b) Hinges

To mount the hinges it is necessary to drill two holes (dia. 35 mm, depth

12.5-14 mm) on the inner side of the door. The distance between the holes hobs fixing centres must be 416 mm.

The distance (B) from upper edge of the door to the centre of the hole depends on the adjacent furniture's dimensions.

35 Ø 12.5-14 depth

16
-
	22

	-598
C	595

416C B

22+1,5

The required dimensions are given in the picture C.

The hinges will be fixed to the door by means of screws for wood (2-Fig. B) supplied with the appliance.

55