Electrolux 12700 VI manual This function cannot be used with Quick and Prewash

Page 15

Description of the appliance

and the light of the START/PAUSE button flashes to indicate that the water must be emptied out.

To empty out water:

select SPIN SPEED and press START/PAUSE-button;

press the START/PAUSE button: after emptying, the machine performs the spin cycle required for the type of wash selected;

select the DRAIN programme to empty out the water without spin- ning.

Warning! The programme selector dial must be turned first to RESET and then to programme “DRAIN”.

If the water is not emptied out, the machine automatically empties itself after 18 hours.

The RINSE HOLD option cannot be selected for the automatic WASHING & DRYING programme.

PREWASH

The machine performs a prewash cycle at 30°C max. The prewash cycle ends with a short spin in programmes for Cotton and Easy-cares, and with emptying of the water only for Delicates.

This option is not available with the wool programme and cannot be used with STAIN.

For use when washing heavily soiled laundry.

STAIN

To treat heavily soiled washing or stained washing with stain remover (extended main wash with time optimised stain action phase, not selec- table for wool or programmes with temperatures lower than 40°C).

This function cannot be used with QUICK and PREWASH.

QUICK

By pressing this button the washing time is reduced. For use when washing lightly soiled laundry.

This option is not available with the wool and Economy programme and cannot be used with STAIN.

EXTRA RINSE

Can be used with all programmes except the wool programme. The machine performs 4 rinses instead of 3.

This option is recommended for people who are allergic to detergents and in areas where the water is very soft.

15

Image 15
Contents Lavamat 12700 VI Turbo Dear customer Contents Programme charts Building-in Technical data Service & Spare Parts Guarantee ConditionsSafety instructions General safetyInstallation During use Child safetyDisposal Packaging materialsMachine Tips for environmental protection Main features of your washer-dryer Front view Description of the applianceControl panel Programme selector dialSelector is divided into 5 sections START/PAUSE button Delay Start buttonON/OFF button Mains-on lightProgramme Option buttons Drying Time buttonThis function cannot be used with Quick and Prewash PrewashProgramme progress display DisplayOpening the door after the programme has started Cancelling/Altering a programmeBefore the first wash Detergent dispenser drawerSorting out and preparing the laundry Preparing the wash cycleSynthetics Easy-cares Weight of laundryTypes of fabric and care labels CottonDelicates Which detergent? Detergents and additivesTraditional Powders Which form?As a dryer, the machine works on the condensation principle Preparing the drying cycleLoad Garments not suitable for dryingFibre residue Drying symbols on garment labelsDuration of the drying cycle Modification of the drying timeAdditional drying Add detergent and additive How to washSwitching the machine on Load the laundrySelection of the desired wash programme Selection of the Spin Speed or Rinse Hold optionSelection of the Extra Rinse option Selection of the Delay Start option If the delay start option has been selected, the machineStarting the programme How to dry At the end of the programmeDrying only NON-STOP programme Automatic washing and dryingWash programmes Programme chartTo empty press Special programmesDrying Exterior Cleaning and maintenancePeriodical cleaning After each washDoor seal Drain filterWater inlet filter Emergency emptying out Frost precautionsSomething not working? TroubleshootingProblem Noisy Feet have not been E10 White residue is left on the laundry Unsatisfactory washing resultsIf grey stains remain on the laundry Foam is still visible even after the last rinseTechnical data Water pressure 50 800 kPaThis appliance complies with the following EC directives Help us to help you Service & Spare PartsService & Spare Parts 08705 929Customer care Guarantee Conditions Italy Pordenone +39 1678 Sweden Stockholm +46 738 Slough +44 European GuaranteeSafety instructions for the installer Instructions for installation and electrical connectionRear view Front view and side viewTic bag and the previously removed screw InstallationUnpacking Carefully slide out the right poly- thene bagPositioning LevellingSet the machine Do not connect to a hot water supply Water inlet cold water connection onlyWater drainage Connect the hose to a tap with a 3/4 threadElectrical connections Interest of the environmentPermanent connection Green and Yellow Earth BlueBrown Live Hinges Preparation and assembly of the doorBuilding-in DoorCounter-magnet Mounting the doorSee Fig. H Drill four fixing holes see Fig. GBuilding-in