Electrolux 12700 VI manual Noisy Feet have not been

Page 40

Something not working?

Problem		Possible cause	Solution

		The transit bolts have	Check that the machine
		not been removed.	has been unpacked as
			described in the Installation
The machine vibrates or is			section.
The machine vibrates or is
noisy		The feet have not been	Carefully level the machine.
		adjusted.
		There is little laundry in	Correct operation of the
		the drum.	machine is not affected.

		The programme is still	Wait until the end of the
		running.	programme before opening
			the door.
		The water level is above the	Before opening the door,
The door will not open		bottom edge of the door.	the water must be emptied
			out.
		The machine is heating the	Wait until the end of the
		water or drying the	heating or drying phase.
		clothes.

40

Image 40

Contents Lavamat 12700 VI Turbo Dear customer Contents Programme charts Technical data Service & Spare Parts Guarantee Conditions Building-inGeneral safety Safety instructionsInstallation Child safety During usePackaging materials DisposalMachine Tips for environmental protection Main features of your washer-dryer Description of the appliance Front viewProgramme selector dial Control panelSelector is divided into 5 sections Delay Start button ON/OFF buttonMains-on light START/PAUSE buttonDrying Time button Programme Option buttonsPrewash This function cannot be used with Quick and PrewashDisplay Programme progress displayCancelling/Altering a programme Opening the door after the programme has startedDetergent dispenser drawer Before the first washPreparing the wash cycle Sorting out and preparing the laundryWeight of laundry Types of fabric and care labelsCotton Synthetics Easy-caresDelicates Detergents and additives Which detergent?Which form? Traditional PowdersPreparing the drying cycle LoadGarments not suitable for drying As a dryer, the machine works on the condensation principleDrying symbols on garment labels Duration of the drying cycleModification of the drying time Fibre residueAdditional drying How to wash Switching the machine onLoad the laundry Add detergent and additiveSelection of the Spin Speed or Rinse Hold option Selection of the desired wash programmeSelection of the Extra Rinse option If the delay start option has been selected, the machine Selection of the Delay Start optionStarting the programme At the end of the programme How to dryDrying only Automatic washing and drying NON-STOP programmeProgramme chart Wash programmesSpecial programmes To empty pressDrying Cleaning and maintenance Periodical cleaningAfter each wash ExteriorDrain filter Door sealWater inlet filter Frost precautions Emergency emptying outTroubleshooting Something not working?Problem Noisy Feet have not been E10 Unsatisfactory washing results If grey stains remain on the laundryFoam is still visible even after the last rinse White residue is left on the laundryWater pressure 50 800 kPa Technical dataThis appliance complies with the following EC directives Service & Spare Parts Service & Spare Parts08705 929 Help us to help youCustomer care Guarantee Conditions European Guarantee Italy Pordenone +39 1678 Sweden Stockholm +46 738 Slough +44Instructions for installation and electrical connection Safety instructions for the installerFront view and side view Rear viewInstallation UnpackingCarefully slide out the right poly- thene bag Tic bag and the previously removed screwLevelling PositioningSet the machine Water inlet cold water connection only Water drainageConnect the hose to a tap with a 3/4 thread Do not connect to a hot water supplyInterest of the environment Electrical connectionsGreen and Yellow Earth Blue Permanent connectionBrown Live Preparation and assembly of the door Building-inDoor HingesMounting the door Counter-magnetDrill four fixing holes see Fig. G See Fig. HBuilding-in