Electrolux 12700 VI Cleaning and maintenance, After each wash, Periodical cleaning, Exterior

Page 35

Cleaning and maintenance

After each wash

At the end of the wash programme, pull the dispenser drawer out a lit- tle to let it dry.

Leave the door ajar to allow air to circulate.

If the machine is not used for a prolonged period:

Close the water tap and unplug the appliance.

Periodical cleaning

Maintenance Wash

With the use of low temperature washes it is possible to get a build up of residues inside the drum.

We recommend that a maintenance wash be performed on a regular basis.

To run a maintenance wash:

The drum should be empty of laundry.

Select the hottest cotton wash programme.

Use a normal measure of detergent, must be a powder (such as Ariel Futur).

Exterior

Clean the outside of the cabinet with soap and water only. Rinse with clean water and dry.

Important: do not use methylated spirits, solvents or similar products to clean the cabinet.

Detergent dispenser drawer

After a while, detergents and fabric softeners leave deposits in the drawer.

Clean the drawer, from time to time, by rinsing it under a running tap.

35

Image 35
Contents Lavamat 12700 VI Turbo Dear customer Contents Programme charts Building-in Technical data Service & Spare Parts Guarantee ConditionsInstallation Safety instructionsGeneral safety During use Child safetyMachine DisposalPackaging materials Tips for environmental protection Main features of your washer-dryer Front view Description of the applianceSelector is divided into 5 sections Control panelProgramme selector dial START/PAUSE button Delay Start buttonON/OFF button Mains-on lightProgramme Option buttons Drying Time buttonThis function cannot be used with Quick and Prewash PrewashProgramme progress display DisplayOpening the door after the programme has started Cancelling/Altering a programmeBefore the first wash Detergent dispenser drawerSorting out and preparing the laundry Preparing the wash cycleSynthetics Easy-cares Weight of laundryTypes of fabric and care labels CottonDelicates Which detergent? Detergents and additivesTraditional Powders Which form?As a dryer, the machine works on the condensation principle Preparing the drying cycleLoad Garments not suitable for dryingFibre residue Drying symbols on garment labelsDuration of the drying cycle Modification of the drying timeAdditional drying Add detergent and additive How to washSwitching the machine on Load the laundrySelection of the Extra Rinse option Selection of the desired wash programmeSelection of the Spin Speed or Rinse Hold option Starting the programme Selection of the Delay Start optionIf the delay start option has been selected, the machine Drying only How to dryAt the end of the programme NON-STOP programme Automatic washing and dryingWash programmes Programme chartTo empty press Special programmesDrying Exterior Cleaning and maintenancePeriodical cleaning After each washWater inlet filter Door sealDrain filter Emergency emptying out Frost precautionsSomething not working? TroubleshootingProblem Noisy Feet have not been E10 White residue is left on the laundry Unsatisfactory washing resultsIf grey stains remain on the laundry Foam is still visible even after the last rinseThis appliance complies with the following EC directives Technical dataWater pressure 50 800 kPa Help us to help you Service & Spare PartsService & Spare Parts 08705 929Customer care Guarantee Conditions Italy Pordenone +39 1678 Sweden Stockholm +46 738 Slough +44 European GuaranteeSafety instructions for the installer Instructions for installation and electrical connectionRear view Front view and side viewTic bag and the previously removed screw InstallationUnpacking Carefully slide out the right poly- thene bagSet the machine PositioningLevelling Do not connect to a hot water supply Water inlet cold water connection onlyWater drainage Connect the hose to a tap with a 3/4 threadElectrical connections Interest of the environmentBrown Live Permanent connectionGreen and Yellow Earth Blue Hinges Preparation and assembly of the doorBuilding-in DoorCounter-magnet Mounting the doorSee Fig. H Drill four fixing holes see Fig. GBuilding-in