Description of the appliance
Display
The display shows the following information:
•Duration of the selected programme (in minutes), calculated auto- matically on the basis of the maximum recommended load for each type of fabric.
•Selected drying time (max. 130 minutes for cotton, 100 minutes for synthetics).
After the programme has started, the time remaining is updated every minute.
•When the programme has finished, a steadily lit zero is displayed.
•Delayed start, (19 hours max.) programmed using the special button. The countdown is updated every hour.
•Alarm code indicating a fault in the machine operation (see page 37).
Programme progress display
By selecting the wash programme, the pilot lights corre- sponding to the various phases making up the programme come on.
After the machine has started, only the running phase pilot light stays on. When the programme has finished, the END pilot light comes on.
PREWASH
WASH
RINSES
EXTRA RINSE SPIN DRYING
END OVERDOSAGE
When the programme has finished, if the OVERDOSAGE light comes on, it indicates that too much detergent has been used or that the drain fil- ter is blocked.
15