Electrolux OKO-Lavamat 16800, Lavamat 14800, LAVAMAT 14800 Safety instructions for the installer

Page 47

Instructions for installation and electrical connection

Safety instructions for the installer

•This appliance is heavy, care should be taken when moving it.

•When unpacking the appliance, check that it is not damaged. If in doubt, do not use it and contact the retailer.

•All internal packing must be removed before using the appliance. Serious damage may be caused to the machine or adjacent furniture if the protective transit devices are not completely removed. Refer to the relevant paragraph.

•Any electrical work required to install this appliance must be carried out by a qualified electrician or competent person.

•Any plumbing work required to install this appliance must be carried out by a qualified plumber or competent person.

•After having installed the machine, check that it is not standing on its electrical supply cable.

•If the appliance is placed on a carpeted floor, ensure that air can cir- culate freely between the adjustable feet and the floor.

•The installation should comply with local water authority and build- ing regulations requirements.

•Should the appliance power supply cable need to be replaced, this should be carried out by our Service Force Centre.

47

Image 47

Contents Turbo Electronic Dear customer Contents Automatic washing and drying NON-STOP programme Programme charts wash and special programmesPage Installation Safety instructionsGeneral safety During use Child safetyMachine DisposalTips for environmental protection Packaging materialsMain features of your washer-dryer Front view Description of the applianceProgramme selector dial Control panelSTART/PAUSE button Delayed Start buttonProgramme Option buttons Electronic Drying button Store DRYDrying Time button Prewash Programme progress display DisplayOpening the door after the programme has started Cancelling a programmeAltering a programme which is running Before the first wash Detergent dispenser drawerSorting out and preparing the laundry Preparing the wash cycleSynthetics Sort of laundry Approximate Dry weightsTypes of fabric and care labels CottonDelicates 40 Which detergent? Detergents and additivesTraditional Powders Which form?Garments not suitable for drying Preparing the drying cycleLoad Fibre residue Drying symbols on garment labelsDuration of the drying cycle Modification of the drying time or degree of dryingAdd detergent and additive How to washMax. load Load the laundrySelection of the desired options Selection of the desired wash programmeSelection of the Extra Rinse option Selection of the Delayed Start optionDown Starting the programmeAt the end of the programme Drying only Max. load How to dryAutomatic washing and drying NON-STOP programmeWash programmes Programme chartMax Consumption Tion Special programmesDescrip Timed Drying Consumption data for timed dryingAfter each wash Cleaning and maintenanceMaintenance Wash Periodical cleaning ExteriorDrain filter Door sealEmergency emptying out Frost precautionsWater inlet filter Something not working? TroubleshootingProblem Possible cause Solution Possible cause Solution ProblemNoisy Feet have not been E10 Problem Possible causeWhite residue is left on the laundry Unsatisfactory washing resultsIf grey stains remain on the laundry Foam is still visible even after the last rinseThis appliance complies with the following EC directives Technical dataHelp us to help you Service & Spare PartsService & Spare Parts 08705 929Customer care Guarantee Conditions European Guarantee Safety instructions for the installer Instructions for installation and electrical connectionFront view and side view Dimensions of the applianceUnpacking InstallationWater inlet cold water connection only Installation on a suspended floorPositioning LevellingDo not connect to a hot water supply Model Water drainageInterest of the environment Remove the fuse from the cut off plug Electrical connectionsPermanent connection