Electrolux LAVAMAT 14800 manual Automatic washing and drying, How to dry, NON-STOP programme

Page 30

How to wash

Automatic washing and drying

(NON-STOP programme)

Warning! For NON-STOP programmes, it is also essential not to exceed the maximum load sizes of 2.75 kg for cotton and 2 kg for synthetics.

Load the laundry.

Add detergent and additive.

Do not use a dosing device when carrying out automatic washing and drying programme.

Select the wash programme.

Select the required options by means of the relevant buttons. If possible, do not select a spin speed lower than that proposed by the appliance to avoid a too long drying time so saving energy.

When automatically washing and drying it is not possible to select a spin speed lower than 900 r.p.m. for cottons and 700 r.p.m. for synthetics. Select the drying time or degree of drying.

Start the programme by depressing the START/PAUSE button. At the end of the programme, turn the selector dial to O. Remove the laundry.

How to dry

Drying only
Max. load
- cottons	2.75 kg
- synthetics	2 kg

During the drying programme the water tap must be open and the drain hose must be correctly positioned.

Turn the programme selector dial to DRYING for cottons or synthetics.

If you wish to carry out the timed drying press the relevant button until the time you want appears in the display.

If you wish to carry out the electronic drying depress the relevant button until the light corresponding to the degree of dryness required (store dry or iron dry) illuminates.

Press the START/PAUSE button to start the programme.

At the end of the cycle turn the programme selector dial to O and remove the laundry.

30

Image 30

Contents Turbo Electronic Dear customer Contents Programme charts wash and special programmes Automatic washing and drying NON-STOP programmePage Safety instructions General safetyInstallation Child safety During usePackaging materials DisposalTips for environmental protection MachineMain features of your washer-dryer Description of the appliance Front viewControl panel Programme selector dialDelayed Start button START/PAUSE buttonElectronic Drying button Store DRY Drying Time buttonProgramme Option buttons Prewash Display Programme progress displayCancelling a programme Altering a programme which is runningOpening the door after the programme has started Detergent dispenser drawer Before the first washPreparing the wash cycle Sorting out and preparing the laundryCotton Sort of laundry Approximate Dry weightsTypes of fabric and care labels SyntheticsDelicates 40 Detergents and additives Which detergent?Which form? Traditional PowdersPreparing the drying cycle LoadGarments not suitable for drying Modification of the drying time or degree of drying Drying symbols on garment labelsDuration of the drying cycle Fibre residueLoad the laundry How to washMax. load Add detergent and additiveSelection of the desired wash programme Selection of the desired optionsSelection of the Delayed Start option Selection of the Extra Rinse optionStarting the programme DownAt the end of the programme NON-STOP programme How to dryAutomatic washing and drying Drying only Max. loadProgramme chart Wash programmesSpecial programmes DescripMax Consumption Tion Consumption data for timed drying Timed DryingPeriodical cleaning Exterior Cleaning and maintenanceMaintenance Wash After each washDoor seal Drain filterFrost precautions Water inlet filterEmergency emptying out Troubleshooting Problem Possible cause SolutionSomething not working? Problem Possible cause SolutionNoisy Feet have not been Problem Possible cause E10Foam is still visible even after the last rinse Unsatisfactory washing resultsIf grey stains remain on the laundry White residue is left on the laundryTechnical data This appliance complies with the following EC directives08705 929 Service & Spare PartsService & Spare Parts Help us to help youCustomer care Guarantee Conditions European Guarantee Instructions for installation and electrical connection Safety instructions for the installerDimensions of the appliance Front view and side viewInstallation UnpackingLevelling Installation on a suspended floorPositioning Water inlet cold water connection onlyWater drainage Do not connect to a hot water supply ModelInterest of the environment Electrical connections Remove the fuse from the cut off plugPermanent connection