How to wash
At the end of the programme
The machine stops automatically. A zero appears on the display. An acoustic signal is clearly audible. The END light comes on in the pro- gramme progress display.
If the OVERDOSAGE light comes on it indicates that too much deter- gent has been used. At the next wash carefully follow the detergent manufacturer’s instructions. Measure out detergent according to amount, type, degree of soil of fabrics and water hardness.
This light could come on also when the drain filter is blocked.
If the RINSE HOLD option has been selected, the water must be emp- tied out before opening the door either
-by pressing the START/PAUSE button (the laundry will be spun at the speed corresponding to the selected type of fabrics. The spin speed can be reduced by means of the SPIN SPEED button)
-or by turning the selector dial to O and then to DRAIN and pressing the START/PAUSE button again. In this case the water will be emptied, but the laundry is not spun.
Turn the selector dial to O. Remove the laundry from the drum.
Check that the drum is empty so as to avoid any forgotten items being damaged in a subsequent wash (e.g. shrinking) or their colour running into a load of whites.
Close the water tap.
Leave the door open to prevent the formation of mildew and unpleas- ant smells.
29