Electrolux OKO-Lavamat 16800, Lavamat 14800, LAVAMAT 14800 manual Installation, Unpacking

Page 49

Installation

Unpacking

All transit bolts and packing must be removed before using the appli- ance.

Using a spanner, unscrew and remove the rear right-hand bolt and lay the machine on its back, taking care not to squash the hoses. This can be avoided by placing one of the corner packing pieces between the machine and the floor.

025

Remove the poly- styrene block from the bottom of the machine and release the two plastic bags which are fixed under the filter door.

2 1

Carefully remove

the right-hand bag (1) then the left-hand bag (2) by pulling them towards the centre of the machine.

Set the machine

upright and

remove the two remaining bolts

from the back.

Pull out the three plastic spacers from the holes into which the bolts

were fitted.

Plug the open holes with the plugs which you will find in the plastic bag containing the instruction booklet.

You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again.

49

Image 49

Contents Turbo Electronic Dear customer Contents Automatic washing and drying NON-STOP programme Programme charts wash and special programmesPage General safety Safety instructionsInstallation During use Child safetyTips for environmental protection DisposalPackaging materials MachineMain features of your washer-dryer Front view Description of the applianceProgramme selector dial Control panelSTART/PAUSE button Delayed Start buttonDrying Time button Electronic Drying button Store DRYProgramme Option buttons Prewash Programme progress display DisplayAltering a programme which is running Cancelling a programmeOpening the door after the programme has started Before the first wash Detergent dispenser drawerSorting out and preparing the laundry Preparing the wash cycleTypes of fabric and care labels Sort of laundry Approximate Dry weightsCotton SyntheticsDelicates 40 Which detergent? Detergents and additivesTraditional Powders Which form?Load Preparing the drying cycleGarments not suitable for drying Duration of the drying cycle Drying symbols on garment labelsModification of the drying time or degree of drying Fibre residueMax. load How to washLoad the laundry Add detergent and additiveSelection of the desired options Selection of the desired wash programmeSelection of the Extra Rinse option Selection of the Delayed Start optionDown Starting the programmeAt the end of the programme Automatic washing and drying How to dryNON-STOP programme Drying only Max. loadWash programmes Programme chartDescrip Special programmesMax Consumption Tion Timed Drying Consumption data for timed dryingMaintenance Wash Cleaning and maintenancePeriodical cleaning Exterior After each washDrain filter Door sealWater inlet filter Frost precautionsEmergency emptying out Problem Possible cause Solution TroubleshootingSomething not working? Possible cause Solution ProblemNoisy Feet have not been E10 Problem Possible causeIf grey stains remain on the laundry Unsatisfactory washing resultsFoam is still visible even after the last rinse White residue is left on the laundryThis appliance complies with the following EC directives Technical dataService & Spare Parts Service & Spare Parts08705 929 Help us to help youCustomer care Guarantee Conditions European Guarantee Safety instructions for the installer Instructions for installation and electrical connectionFront view and side view Dimensions of the applianceUnpacking InstallationPositioning Installation on a suspended floorLevelling Water inlet cold water connection onlyDo not connect to a hot water supply Model Water drainageInterest of the environment Remove the fuse from the cut off plug Electrical connectionsPermanent connection