Electrolux LAVAMAT 14800 manual Positioning, Levelling, Installation on a suspended floor, Model

Page 50

Positioning

Install the machine on a flat hard floor.

Make sure that air circulation around the machine is not impeded by carpets, rugs etc.

•Before placing it on small tiles, apply a rubber coating.

•Never try to correct any unevenness in the floor by putting pieces of wood, cardboard or similar materials under the machine.

•If it is impossible to avoid positioning the machine next to a gas cooker or coal-burning stove, an insulating panel (85x57 cm) covered with aluminium foil on the side facing the cooker or stove, must be inserted between the two appliances;

•The machine must not be installed in rooms where the temperature can drop below 0°C.

•The water inlet hose and the drain hose must not be kinked.

•Please ensure that when the appliance is installed, it is easily accessi- ble for the engineer in the event of a breakdown.

Levelling

Carefully level by screwing the adjustable feet in or out. Never place cardboard, wood or similar materials under the machine to compensate for any unevenness in the floor.

Installation on a suspended floor

Suspended wooden floors are particularly susceptible to vibration. To help prevent

vibration we recommend you place a waterproof wood panel, at least 15 mm thick under the appliance, secured to at least 2 floor beams with screws. If possible install the appliance in one of the corners of the room, where the floor is more stable.

Water inlet (cold water connection only)

Connect the hose	Model 16800	Model 14800
to a tap with a
3/4” thread.
Installation
should comply
with local water
authority and
building regula-
tions’ require-
ments.

50

Image 50

Contents Turbo Electronic Dear customer Contents Programme charts wash and special programmes Automatic washing and drying NON-STOP programmePage Installation Safety instructionsGeneral safety Child safety During usePackaging materials DisposalTips for environmental protection MachineMain features of your washer-dryer Description of the appliance Front viewControl panel Programme selector dialDelayed Start button START/PAUSE buttonProgramme Option buttons Electronic Drying button Store DRYDrying Time button Prewash Display Programme progress displayOpening the door after the programme has started Cancelling a programmeAltering a programme which is running Detergent dispenser drawer Before the first washPreparing the wash cycle Sorting out and preparing the laundryCotton Sort of laundry Approximate Dry weightsTypes of fabric and care labels SyntheticsDelicates 40 Detergents and additives Which detergent?Which form? Traditional PowdersGarments not suitable for drying Preparing the drying cycleLoad Modification of the drying time or degree of drying Drying symbols on garment labelsDuration of the drying cycle Fibre residueLoad the laundry How to washMax. load Add detergent and additiveSelection of the desired wash programme Selection of the desired optionsSelection of the Delayed Start option Selection of the Extra Rinse optionStarting the programme DownAt the end of the programme NON-STOP programme How to dryAutomatic washing and drying Drying only Max. loadProgramme chart Wash programmesMax Consumption Tion Special programmesDescrip Consumption data for timed drying Timed DryingPeriodical cleaning Exterior Cleaning and maintenanceMaintenance Wash After each washDoor seal Drain filterEmergency emptying out Frost precautionsWater inlet filter Something not working? TroubleshootingProblem Possible cause Solution Problem Possible cause SolutionNoisy Feet have not been Problem Possible cause E10Foam is still visible even after the last rinse Unsatisfactory washing resultsIf grey stains remain on the laundry White residue is left on the laundryTechnical data This appliance complies with the following EC directives08705 929 Service & Spare PartsService & Spare Parts Help us to help youCustomer care Guarantee Conditions European Guarantee Instructions for installation and electrical connection Safety instructions for the installerDimensions of the appliance Front view and side viewInstallation UnpackingLevelling Installation on a suspended floorPositioning Water inlet cold water connection onlyWater drainage Do not connect to a hot water supply ModelInterest of the environment Electrical connections Remove the fuse from the cut off plugPermanent connection