Electrolux LAVAMAT 14800 manual Cancelling a programme, Altering a programme which is running

Page 16

Description of the appliance

Cancelling a programme

To cancel a programme which is running, turn the programme selector dial to the RESET O position.

Warning! After a programme which ends with water in the drum (RINSE HOLD option), turn the selector dial first to O and then to the DRAIN programme.

Altering a programme which is running

To alter a programme, first set the machine to PAUSE by pressing the START/PAUSE button.

Any function can be modified before the machine starts it. After select- ing the new option press the START/PAUSE button again to re-start the selected programme.

To modify the selected programme turn the programme selector dial to O and then choose a new programme.

The water is not emptied out and after pressing the START/PAUSE but- ton again the machine restarts with the newly selected programme.

Opening the door after the programme has started

To open the door set the machine to PAUSE by pressing the START/PAUSE button.

The door can be opened if:

•the machine is not already heating or drying;

•the water level is not above the bottom edge of the door;

•the drum is not turning.

The light on the control panel beside the START/PAUSE button indicates if the door can be opened:

•green light: the door can be opened;

•unlit light: the door cannot be opened;

•flashing red light: the door is open.

16

Image 16

Contents Turbo Electronic Dear customer Contents Programme charts wash and special programmes Automatic washing and drying NON-STOP programmePage General safety Safety instructionsInstallation Child safety During useDisposal Tips for environmental protectionPackaging materials MachineMain features of your washer-dryer Description of the appliance Front viewControl panel Programme selector dialDelayed Start button START/PAUSE buttonDrying Time button Electronic Drying button Store DRYProgramme Option buttons Prewash Display Programme progress displayAltering a programme which is running Cancelling a programmeOpening the door after the programme has started Detergent dispenser drawer Before the first washPreparing the wash cycle Sorting out and preparing the laundrySort of laundry Approximate Dry weights Types of fabric and care labelsCotton SyntheticsDelicates 40 Detergents and additives Which detergent?Which form? Traditional PowdersLoad Preparing the drying cycleGarments not suitable for drying Drying symbols on garment labels Duration of the drying cycleModification of the drying time or degree of drying Fibre residueHow to wash Max. loadLoad the laundry Add detergent and additiveSelection of the desired wash programme Selection of the desired optionsSelection of the Delayed Start option Selection of the Extra Rinse optionStarting the programme DownAt the end of the programme How to dry Automatic washing and dryingNON-STOP programme Drying only Max. loadProgramme chart Wash programmesDescrip Special programmesMax Consumption Tion Consumption data for timed drying Timed DryingCleaning and maintenance Maintenance WashPeriodical cleaning Exterior After each washDoor seal Drain filterWater inlet filter Frost precautionsEmergency emptying out Problem Possible cause Solution TroubleshootingSomething not working? Problem Possible cause SolutionNoisy Feet have not been Problem Possible cause E10Unsatisfactory washing results If grey stains remain on the laundryFoam is still visible even after the last rinse White residue is left on the laundryTechnical data This appliance complies with the following EC directivesService & Spare Parts Service & Spare Parts08705 929 Help us to help youCustomer care Guarantee Conditions European Guarantee Instructions for installation and electrical connection Safety instructions for the installerDimensions of the appliance Front view and side viewInstallation UnpackingInstallation on a suspended floor PositioningLevelling Water inlet cold water connection onlyWater drainage Do not connect to a hot water supply ModelInterest of the environment Electrical connections Remove the fuse from the cut off plugPermanent connection