Electrolux OKO-Lavamat 16800, Lavamat 14800 manual Something not working?, Troubleshooting

Page 37

Something not working?

If during the spin cycle the machine makes an unusual whistling noise, different from the noise made by tradi- tional washing machines, this is due to a new type of motor.

If water is not visible in the drum, this is due to the modern technology of new washing machines that use less water than traditional machines.

Troubleshooting

If a problem arises, you can try to solve it yourself following the instructions below.

If you call out an engineer when one of the following problems arises, or to repair a fault due to incorrect use, the call-out will be charged even if requested within the guarantee period.

During machine operation the following alarm codes may be displayed:

-E10: problem with the water supply (phase light EXTRA RINSE is on)

-E20: problem with water draining (phase light RINSES is on)

-E40: door open (phase light WASH is on)

Once the problem has been eliminated, press the START/PAUSE button to restart the programme. If after all checks, the problem persists, con- tact your local AEG Service Force Centre.

If the alarm code EFO (water leakage) appears on the display, con- tact the Service Force Centre.

Problem		Possible cause	Solution


		The main electrical fuse	Replace the fuse.
		has blown.
		The door is not properly	Close the door; the click
		closed (E40).	of the lock should be heard.
The machine does not work		The plug is not connected.	Insert the plug.
		The START button has not	Press the button.
		been pressed.
		The DELAYED START	Check the selected delay on
		option has been selected.	the display.

37

Image 37

Contents Turbo Electronic Dear customer Contents Automatic washing and drying NON-STOP programme Programme charts wash and special programmesPage General safety Safety instructionsInstallation During use Child safetyTips for environmental protection DisposalPackaging materials MachineMain features of your washer-dryer Front view Description of the applianceProgramme selector dial Control panelSTART/PAUSE button Delayed Start buttonDrying Time button Electronic Drying button Store DRYProgramme Option buttons Prewash Programme progress display DisplayAltering a programme which is running Cancelling a programmeOpening the door after the programme has started Before the first wash Detergent dispenser drawerSorting out and preparing the laundry Preparing the wash cycleTypes of fabric and care labels Sort of laundry Approximate Dry weightsCotton SyntheticsDelicates 40 Which detergent? Detergents and additivesTraditional Powders Which form?Load Preparing the drying cycleGarments not suitable for drying Duration of the drying cycle Drying symbols on garment labelsModification of the drying time or degree of drying Fibre residueMax. load How to washLoad the laundry Add detergent and additiveSelection of the desired options Selection of the desired wash programmeSelection of the Extra Rinse option Selection of the Delayed Start optionDown Starting the programmeAt the end of the programme Automatic washing and drying How to dryNON-STOP programme Drying only Max. loadWash programmes Programme chartDescrip Special programmesMax Consumption Tion Timed Drying Consumption data for timed dryingMaintenance Wash Cleaning and maintenancePeriodical cleaning Exterior After each washDrain filter Door sealWater inlet filter Frost precautionsEmergency emptying out Problem Possible cause Solution TroubleshootingSomething not working? Possible cause Solution ProblemNoisy Feet have not been E10 Problem Possible causeIf grey stains remain on the laundry Unsatisfactory washing resultsFoam is still visible even after the last rinse White residue is left on the laundryThis appliance complies with the following EC directives Technical dataService & Spare Parts Service & Spare Parts08705 929 Help us to help youCustomer care Guarantee Conditions European Guarantee Safety instructions for the installer Instructions for installation and electrical connectionFront view and side view Dimensions of the applianceUnpacking InstallationPositioning Installation on a suspended floorLevelling Water inlet cold water connection onlyDo not connect to a hot water supply Model Water drainageInterest of the environment Remove the fuse from the cut off plug Electrical connectionsPermanent connection