INSTALLATION 
WATER SUPPLY CONNECTION 
2Screw the straight end of the hose clockwise to a 19mm (3/4’’) cold water tap until hand
tight (fig 8). Take care not to trap or kink the hose.
Figure 8
DRAIN HOSE CONNECTION
a:
b:
Max height 80cm
Min height 0cm
a:The drain hose can be connected to a standpipe, as shown. The hose must be between 0cm and 80cm from the ground.
b:The drain hose can be connected to a household sink, as shown. The hose must be between 60cm to 100cm from the ground.
Do not connect your Washer Dryer to a surface water drain.
Connect your Washer Dryer to your household drainage system (fig 9).
For your Washer Dryer to function properly the outlet end of the drain hose must be at a minimum of 60cm and a maximum of 100cm from the ground.
CAUTION: Check to ensure that the hose is not trapped, kinked, twisted, folded or crushed.
Do not attempt to extend the drain hose by adding extra sections.
Figure 9
15 T: 0800 0124 382
T: 0800 0124 382 16