SETTING UP 
Eco Time Setting (Economic Time Interval) 
To help make savings on your energy bills, your Washer Dryer contains an Eco Time Setting. This allows you to set your Washer Dryer to run during the hours when your electricity tariff is more economical. Please be aware that a smart counter will be required in order for this mode to work. When setting the Economic Time Interval fot the first time:
Press the 
button on the main programme screen and use the 
button until 
and ‘set economic time zone’ is displayed on the information screen.
Press the 
button to set Eco Time, or the 
button to return to the main programme screen.
If you have chosen to set Eco Time:
and the start and end time of the economic time interval will be displayed on the information screen (fig 13).
Figure 13
23 T: 0800 0124 382
Use the 
and 
buttons to set the start and finish time for the economic time interval.
Press the 
button to confirm the selection, or the 
button to return to the main programme screen.
You can change the Eco Time hours at any time by pressing the 
button from the main
programme screen and using the 
button until the Eco Time hours are displayed. Use the and 
buttons to set the desired Eco Time interval.
To activate the
Sound Adjustment 
You can choose to turn the warning sounds of your Washer Dryer on or off. To access the sound settings:
Press the 
button on the main programme screen and then press the 
button until the
sound adjustment settings are displayed. This is shown by the 
and 
symbols on the information screen. Alternatively, if you are already in the settings menu, simply use the 
button to navigate to the sound adjustment settings.
Use either the 
or 
buttons to toggle the warning sounds on or off. A 
symbol and
3 audible beeps indicates that the warning sounds are turned on. A 
symbol indicates that the warning sounds are turned off.
To return to the main programme screen, press the 
button, or press the 
button .
Screen Brightness Setting 
You can adjust the brightness setting of the information screen on your Washer Dryer:
Press the 
button on the main programme screen and then press the 
button until the
brightness setting screen is displayed. This is shown by the 
symbol. Alternatively, if you are already in the settings menu, simply use the 
button to navigate to the brightness
T: 0800 0124 382 24