INSTALLATION
The cold water pressure for a normal household system ranges from netween 0.1 to 1 Mpa. Your Washer Dryer will run at optimum efficiency in this range.
Once you have made all of the connections, carefully turn your cold water supply on and check for leaks.
17 T: 0800 0124 382
ELECTRICAL CONNECTION
Your Washer Dryer requires a
Your Washer Dryer may be fitted with a moulded plug, which cannot be rewired.
If the fuse cover becomes damaged, you must not use the plug.
If your plug requires changing because it is not suitable for your socket, or it is damaged, you should consult a qualified electrician.
Fuse:
Replacement fuses should be
Replacement fuses can be purchased from an electrical supplier.
T: 0800 0124 382 18