USAGE 
Cancelling a Programme
To cancel a running programme at any time:
Turn the programme dial to the STOP position. Your Washer Dryer will stop the current programme.
Turn the programme dial to any other programme setting to drain the Washer Dryer. You can now select and run a new programme.
Programme End
Your Washer Dryer will automatically stop when the programme you have selected finishes. It is
safe to open the door and remove your laundry when ‘end’ the 
symbol is displayed on the information screen.
Please Note: Your Washer Dryer has a stage that cools down your laundry at the end of its drying operation. This is to reduce the risk of you being harmed as you remove the laundry from your Washer Dryer.
Removing Your Laundry:
1Wait for the selected programme to finish. This is indicated by ‘end’ and the 
symbol of the information screen.
2Pull the door handle forwards and open the door fully.
3Remove your laundry; check that all items have been removed from the drum. Any items left in the drum could discolour items in the next wash or become discoloured themselves.
59 T: 0800 0124 382
4Check the drum and door seal for any small articles that may have become dislodged.
5Leave the door open for a short time to allow the interior of your Washer Dryer to dry. Check the drum is dry and empty before closing the door.
Child Lock
Your Washer Dryer is equipped with a child lock to prevent accidental operation.
To activate the child lock, press the 2 buttons shown in fig 23 simultaneously for a minimum of 3 seconds.
1 Child Lock Buttons
1
Figure 23
If you have successfully selected child lock 
and ‘keylock activated’ will be displayed on the information screen.
T: 0800 0124 382 60